Figure 18-14 Ssh Example 1: Store Host Key; Figure 18-15 Ssh Example 2: Test - ZyXEL Communications ZyWALL 5 User Manual

ZyWALL 5 Internet Security Appliance
18.9.1 Example 1: Microsoft Windows
This section describes how to access the ZyWALL using the Secure Shell Client program.
Launch the SSH client and specify the connection information (IP address, port number or device
1.
name) for the ZyWALL.
Configure the SSH client to accept connection using SSH version 1.
2.
A window displays prompting you to store the host key in you computer. Click Yes to continue.
3.
Enter the password to log in to the ZyWALL. The SMT main menu displays next.
18.9.2 Example 2: Linux
This section describes how to access the ZyWALL using the OpenSSH client program that comes with
most Linux distributions.
Test whether the SSH service is available on the ZyWALL.
1.
Enter "telnet 192.168.1.1 22" at a terminal prompt and press [ENTER]. The computer
attempts to connect to port 22 on the ZyWALL (using the default IP address of 192.168.1.1).
A message displays indicating the SSH protocol version supported by the ZyWALL.
$ telnet 192.168.1.1 22
Trying 192.168.1.1...
Connected to 192.168.1.1.
Escape character is '^]'.
SSH-1.5-1.0.0
Enter "ssh –1 192.168.1.1". This command forces your computer to connect to the
2.
ZyWALL using SSH version 1. If this is the first time you are connecting to the ZyWALL using
SSH, a message displays prompting you to save the host information of the ZyWALL. Type "yes"
and press [ENTER].
Then enter the password to log in to the ZyWALL.
18-12

Figure 18-14 SSH Example 1: Store Host Key

Figure 18-15 SSH Example 2: Test

Remote Management