ZyWALL 5 Internet Security Appliance
Figure 18-18 Telnet Configuration on a TCP/IP Network
18.12 Configuring TELNET
Click REMOTE MGMT, then the TELNET tab. The screen appears as shown.
The following table describes the labels in this screen.
LABEL
Server Port
You may change the server port number for a service if needed, however you must use
the same port number in order to use that service for remote management.
Server Access
Select the interface(s) through which a computer may access the ZyWALL using this
service.
Secure Client IP
A secure client is a "trusted" computer that is allowed to communicate with the ZyWALL
Address
using this service.
Select All to allow any computer to access the ZyWALL using this service.
Choose Selected to just allow the computer with the IP address that you specify to access
the ZyWALL using this service.
Apply
Click Apply to save your customized settings and exit this screen.
Reset
Click Reset to begin configuring this screen afresh.
18-14
Figure 18-19 Telnet
Table 18-3 Telnet
DESCRIPTION
Remote Management