Figure 2-6 Home : Show Statistics; Table 2-5 Home : Show Statistics - ZyXEL Communications ZyWALL 5 User Manual

ZyWALL 5 Internet Security Appliance
LINK
Ports
LOGS View Log
Log Settings
Reports
MAINTENANCE General
Password
Time and Date
F/W Upload
Configuration
Restart
LOGOUT
2.4.4 System Statistics
Click Show Statistics in the HOME screen. Read-only information here includes port status and
packet specific statistics. Also provided is "Up Time" and "poll interval(s)". The Poll Interval(s) field
is configurable.
The following table describes the labels in this screen.
LABEL
Port This is the WAN, LAN, DMZ or WLAN port.
Status This displays the port speed and duplex setting if you're using Ethernet encapsulation and
Down (line is down), Idle (line (ppp) idle), Dial (starting to trigger a call) or Drop (dropping
a call) if you're using PPPoE encapsulation.
2-10
Table 2-4 Screens Summary
TAB
Use this screen to view the NAT port mapping rules that UPnP creates on
the ZyWALL.
Use this screen to view the logs for the categories that you selected.
Use this screen to change your ZyWALL's log settings.
Use this screen to have the ZyWALL record and display the network
usage reports.
This screen contains administrative and system-related information.
Use this screen to change your password.
Use this screen to change your ZyWALL's time and date.
Use this screen to upload firmware to your ZyWALL
Use this screen to backup and restore the configuration or reset the
factory defaults to your ZyWALL.
This screen allows you to reboot the ZyWALL without turning the power
off.
Click this label to exit the web configurator.

Figure 2-6 Home : Show Statistics

Table 2-5 Home : Show Statistics

FUNCTION
DESCRIPTION
Introducing the Web Configurator