ZyWALL 5 Internet Security Appliance
LABEL
First DNS Server
If you have the IP address(es) of the DNS server(s), enter the DNS server's IP address(es)
in the field(s) to the right.
Second DNS
Server
Third DNS Server
21.3 Configuring Password
To change your ZyWALL's password (recommended), click MAINTENANCE, then the Password
tab. The screen appears as shown. This screen allows you to change the ZyWALL's password.
The following table describes the labels in this screen.
LABEL
Old Password
Type the default password or the existing password you use to access the system in this
field.
New Password
Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays a (*) for each character you type.
Retype to Confirm
Type the new password again for confirmation.
Apply
Click Apply to save your changes back to the ZyWALL.
Reset
Click Reset to begin configuring this screen afresh.
21.4 Pre-defined NTP Time Servers List
The ZyWALL uses the following pre-defined list of NTP time servers if you do not specify a time
server or it cannot synchronize with the time server you specified.
21-4
Table 21-2 General Setup (Bridge Mode)
Figure 21-3 Password Setup
Table 21-3 Password Setup
DESCRIPTION
DESCRIPTION
Maintenance