Advanced Wan Setup; Figure 24-3 Menu 2.1 Advanced Wan Setup; Table 24-3 Advanced Wan Port Setup: At Commands Fields - ZyXEL Communications ZyWALL 5 User Manual

FIELD
Init Enter the AT command string to initialize the WAN device. Consult the
manual of your WAN device connected to your Dial Backup port for
specific AT commands.
Edit Advanced To edit the advanced setup for the Dial Backup port, move the cursor to
Setup this field; press the [SPACE BAR] to select Yes and then press [ENTER]
to go to Menu 2.1: Advanced Setup.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to save your
configuration, or press [ESC] at any time to cancel.

24.5 Advanced WAN Setup

Consult the manual of your WAN device connected to your Dial
Backup port for specific AT commands.
To edit the advanced setup for the Dial Backup port, move the cursor to the Edit Advanced Setup
field in
Menu 2 - WAN Setup, press the [SPACE BAR] to select Yes and then press [ENTER].
AT Command Strings:
Dial= atdt
Drop= ~~+++~~ath
Answer= ata
Drop DTR When Hang Up= Yes
AT Response Strings:
CLID= NMBR =
Called Id=
Speed= CONNECT
Press ENTER to Confirm or ESC to Cancel:
The following table describes fields in this menu.

Table 24-3 Advanced WAN Port Setup: AT Commands Fields

FIELD
AT Command Strings:
Dial Enter the AT Command string to make a call.
Drop Enter the AT Command string to drop a call. "~" represents a one
second wait, e.g., "~~~+++~~ath" can be used if your modem has a
slow response time.
Answer Enter the AT Command string to answer a call.
WAN and Dial Backup Setup
Table 24-2 Menu 2: Dial Backup Setup
DESCRIPTION
Menu 2.1 - Advanced WAN Setup

Figure 24-3 Menu 2.1 Advanced WAN Setup

DESCRIPTION
ZyWALL 5 Internet Security Appliance
Call Control:
Dial Timeout(sec)= 60
Retry Count= 0
Retry Interval(sec)= N/A
Drop Timeout(sec)= 20
Call Back Delay(sec)= 15
EXAMPLE
at&fs0=0
Yes
DEFAULT
atdt
+++ath
ata
24-3