Appendix B Hardware Specifications - ZyXEL Communications ZyWALL 5 User Manual

Power Specification
Power Consumption
Power Current
Fuse Rating
MTBF
Operation Temperature
Ethernet Specification for WAN 1
Ethernet Specification for WAN 2
Ethernet Specification for DMZ
Ethernet Specification for LAN
Cable Pin Assignments
In a serial communications connection, generally a computer is DTE (Data Terminal Equipment) and a
modem is DCE (Data Circuit-terminating Equipment). The ZyWALL is DCE when you connect a
computer to the console port. The ZyWALL is DTE when you connect a modem to the dial backup
port.
Pin 5
Pin 9
Chart B-2 Console/Dial Backup Port Pin Assignments
CONSOLE Port RS – 232 (Female) DB-9F
Pin 1 = NON
Pin 2 = DCE-TXD
Pin 3 = DCE –RXD
Pin 4 = DCE –DSR
Pin 5 = GND
Pin 6 = DCE –DTR
1
Pins 2,3 and 5 are used.
Hardware Specifications
Hardware Specifications
Chart B-1 General Specifications
100-240 VAC, 50/60Hz
16 Watts maximum
1.9 Amps
0.5 Amps, 250 VAC
100000 hrs (Mean Time Between Failures)
0º C ~ 40º C
10/100Mbps Half / Full Auto-negotiation
10/100Mbps Half / Full Auto-negotiation
10/100Mbps Half / Full Auto-negotiation
10/100Mbps Half / Full Auto-negotiation
Diagram B-1 Console/Dial Backup Port Pin Layouts
ZyWALL 5 Internet Security Appliance
Appendix B
DIAL BACKUP RS – 232 (Male) DB-9M (Not on all
models)
Pin 1 = NON
Pin 2 = DTE-RXD
Pin 3 = DTE-TXD
Pin 4 = DTE-DTR
Pin 5 = GND
Pin 6 = DTE-DSR
Pin 1
Pin 6
1
B-1