Appendix L Firewall Commands - ZyXEL Communications ZyWALL 5 User Manual

The following describes the firewall commands. See the Command Interpreter appendix for
information on the command structure.
FUNCTION
F F i i r r e e w w a a l l l l
S e t - U p
S e t - U p
config edit firewall active
<yes | no>
config retrieve firewall
config save firewall
D i s p l a y
D i s p l a y
config display firewall
config display firewall set
<set #>
config display firewall set
<set #> rule <rule #>
config display firewall attack
config display firewall e-mail
config display firewall ?
E d i t
E d i t
Firewall Commands
Chart L-1 Firewall Commands
COMMAND
ZyWALL 5 Internet Security Appliance
Appendix L
Firewall Commands
DESCRIPTION
This command turns the firewall on or off.
This command returns the previously saved firewall
settings.
This command saves the current firewall settings.
This command shows the of all the firewall settings
including e-mail, attack, and the sets/ rules.
This command shows the current configuration of a
set; including timeout values, name, default-permit,
and etc.
If you don't put use a number (#) after "set",
information about all of the sets/rules appears.
This command shows the current entries of a rule
in a firewall rule set.
This command shows all of the attack response
settings.
This command shows all of the e-mail settings.
This command shows all of the available firewall
sub commands.
L-1