Editing Login Script - ZyXEL Communications ZyWALL 5 User Manual

ZyWALL 5 Internet Security Appliance
Table 24-6 Menu 11.3: Remote Node Network Layer Options
FIELD
Network Network Address Translation (NAT) allows the translation of an Internet
Address protocol address used within one network (for example a private IP address
Translation used in a local network) to a different IP address known within another network
(for example a public IP address used on the Internet).
Press [SPACE BAR] and then [ENTER] to select either Full Feature, None or
SUA Only.
Choose None to disable NAT.
Choose SUA Only if you have a single public IP address. SUA (Single User
Account) is a subset of NAT that supports two types of mapping: Many-to-One
and Server.
Choose Full Feature if you have multiple public IP addresses. Full Feature
mapping types include: One-to-One, Many-to-One (SUA/PAT), Many-to-
Many Overload, Many- One-to-One and Server. When you select Full
Feature you must configure at least one address mapping set!
See the Network Address Translation (NAT) chapter for a full discussion on
this feature.
Metric Enter a number from 1 to 15 to set this route's priority among the ZyWALL's
routes. The smaller the number, the higher priority the route has.
Private This parameter determines if the ZyWALL will include the route to this remote
node in its RIP broadcasts. If set to Yes, this route is kept private and not
included in RIP broadcasts. If No, the route to this remote node will be
propagated to other hosts through RIP broadcasts.
RIP Direction Press [SPACE BAR] and then [ENTER] to select the RIP Direction from Both/
None/In Only/Out Only and None.
Version Press [SPACE BAR] and then [ENTER] to select the RIP version from RIP-
1/RIP-2B/RIP-2M.
Multicast IGMP (Internet Group Multicast Protocol) is a session-layer protocol used to
establish membership in a Multicast group. The ZyWALL supports both IGMP
version 1 (IGMP-v1) and version 2 (IGMP-v2). Press the [SPACE BAR] to
enable IP Multicasting or select None to disable it. See the LAN Setup chapter
for more information on this feature.
Once you have completed filling in Menu 11.3 Remote Node Network Layer Options, press [ENTER] at the
message "Press ENTER to Confirm..." to save your configuration and return to menu 11, or press [ESC] at any
time to cancel.

24.9 Editing Login Script

For some remote gateways, text login is required before PPP negotiation is started. The ZyWALL
provides a script facility for this purpose. The script has six programmable sets; each set is composed
of an 'Expect' string and a 'Send' string. After matching a message from the server to the 'Expect'
field, the ZyWALL returns the set's 'Send' string to the server.
For instance, a typical login sequence starts with the server printing a banner, a login prompt for you
to enter the user name and a password prompt to enter the password:
Welcome to Acme, Inc.
Login: myLogin
Password:
24-8
DESCRIPTION EXAMPLE
None
(default)
15
(default)
No
(default)
Both
(default)
RIP-1
None
(default)
WAN and Dial Backup Setup