Editing Tcp/Ip Options; Figure 24-6 Menu 11.2: Remote Node Ppp Options; Figure 24-7 Menu 11.3: Remote Node Network Layer Options; Table 24-6 Menu 11.3: Remote Node Network Layer Options - ZyXEL Communications ZyWALL 5 User Manual
Internet security appliance
Hide thumbs
Also See for ZyWALL 5:
- User manual (668 pages) ,
- Support notes (305 pages) ,
- Quick start manual (139 pages)
Table of Contents
Advertisement
This table describes the Remote Node PPP Options Menu, and contains instructions on how to
configure the PPP options fields.
FIELD
Encapsulation
Press [SPACE BAR] and then [ENTER] to select CISCO PPP if your Dial
Backup WAN device uses Cisco PPP encapsulation, otherwise select
Standard PPP.
Compression
Press [SPACE BAR] and then [ENTER] to select Yes to enable or No to
disable Stac compression.
Once you have configured this menu, press [ENTER] at the message "Press ENTER to Confirm..." to save your
configuration, or press [ESC] at any time to cancel.
24.8 Editing TCP/IP Options
Move the cursor to the Edit IP field in menu 11.1, then press [SPACE BAR] to select Yes. Press
[ENTER] to open Menu 11.3 - Remote Node Network Layer Options.
Menu 11.3 - Remote Node Network Layer Options
Figure 24-7 Menu 11.3: Remote Node Network Layer Options
The following table describes the fields in this menu.
Table 24-6 Menu 11.3: Remote Node Network Layer Options
FIELD
IP Address
If your ISP did not assign you a fixed IP address, press [SPACE BAR] and
Assignment
then [ENTER] to select Dynamic, otherwise select Static and enter the IP
address and subnet mask in the following fields.
Rem IP
Enter the (fixed) IP address assigned to you by your ISP (static IP address
Address
assignment is selected in the previous field).
Rem Subnet
Enter the subnet mask associated with your static IP.
Mask
My WAN
Leave the field set to 0.0.0.0 to have the ISP or other remote router
Addr
dynamically (automatically) assign your WAN IP address if you do not know it.
Enter your WAN IP address here if you know it (static).
This is the address assigned to your local ZyWALL, not the remote router.
WAN and Dial Backup Setup
Figure 24-6 Menu 11.2: Remote Node PPP Options
DESCRIPTION
IP Address Assignment= Static
Rem IP Addr= 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
Network Address Translation= SUA Only
Metric= 15
Private= No
RIP Direction= None
Version= N/A
Multicast= None
Enter here to CONFIRM or ESC to CANCEL:
DESCRIPTION
ZyWALL 5 Internet Security Appliance
Standard PPP
EXAMPLE
(default)
No
(default)
EXAMPLE
0.0.0.0
(default)
24-7
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
