Uploading Firmware And Configuration Files; Figure 35-11 Restore Configuration Example; Figure 35-12 Successful Restoration Confirmation Screen - ZyXEL Communications ZyWALL 5 User Manual

ZyWALL 5 Internet Security Appliance
After a successful restoration you will see the following screen. Press any key to restart the
4.
ZyWALL and return to the SMT menu.

Figure 35-12 Successful Restoration Confirmation Screen

35.5 Uploading Firmware and Configuration Files

This section shows you how to upload firmware and configuration files. You can upload configuration
files by following the procedure in the previous Restore Configuration section or by following the
instructions in Menu 24.7.2 - System Maintenance - Upload System Configuration File (for
console port).
WARNING!
Do not interrupt the file transfer process as this may
PERMANENTLY DAMAGE YOUR ZyWALL.
35.5.1 Firmware File Upload
FTP is the preferred method for uploading the firmware and configuration. To use this feature, your
computer must have an FTP client.
When you telnet into the ZyWALL, you will see the following screens for uploading firmware and the
configuration file using FTP.
35-8

Figure 35-11 Restore Configuration Example

Save to ROM
Hit any key to start system reboot.
Type the configuration file's
location, or click Browse to search
for it.
Choose the Xmodem protocol.
Then click Send.
Firmware and Configuration File Maintenance