Figure 3-3 Isp Parameters : Pptp Encapsulation; Table 3-3 Isp Parameters : Pptp Encapsulation - ZyXEL Communications ZyWALL 5 User Manual

ZyWALL 5 Internet Security Appliance
The ZYWALL supports one PPTP server connection at any
given time.
The following table describes the labels in this screen.
LABEL
ISP Parameters for Internet Access
Encapsulation Select PPTP from the drop-down list box.
User Name Type the user name given to you by your ISP.
Password Type the password associated with the User Name above.
Retype Password Type your password again for confirmation.
Nailed-Up Select Nailed-Up Connection if you do not want the connection to time out.
Connection
Idle Timeout Type the time in seconds that elapses before the router automatically disconnects from
the PPTP server.
PPTP Configuration
My IP Address Type the (static) IP address assigned to you by your ISP.
My IP Subnet Type the subnet mask assigned to you by your ISP (if given).
Mask
Server IP Address Type the IP address of the PPTP server.
Connection Enter the connection ID or connection name in this field. It must follow the "c:id" and
ID/Name "n:name" format. For example, C:12 or N:My ISP.
This field is optional and depends on the requirements of your xDSL modem.
Next Click Next to continue.
3-4

Figure 3-3 ISP Parameters : PPTP Encapsulation

Table 3-3 ISP Parameters : PPTP Encapsulation

DESCRIPTION
Wizard Setup