This chapter describes how to configure the ZyWALL's DMZ using Menu 5: DMZ Setup.
27.1 Configuring DMZ Setup
From the main menu, enter 5 to open Menu 5 – DMZ Setup.
27.2 DMZ Port Filter Setup
This menu allows you to specify the filter sets that you wish to apply to your public server(s) traffic.
Press ENTER to Confirm or ESC to Cancel:
27.3 TCP/IP Setup
For more detailed information about RIP setup, IP Multicast and IP alias, please refer to the LAN
chapter.
27.3.1 IP Address
From the main menu, enter 5 to open Menu 5 - DMZ Setup to configure TCP/IP (RFC 1155).
DMZ Setup
Menu 5 - DMZ Setup
1. DMZ Port Filter Setup
2. TCP/IP Setup
Enter Menu Selection Number:
Figure 27-1 Menu 5: DMZ Setup
Menu 5.1 – DMZ Port Filter Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Figure 27-2 Menu 5.1: DMZ Port Filter Setup
ZyWALL 5 Internet Security Appliance
Chapter 27
DMZ Setup
27-1