Configuring Time And Date; Table 21-4 Default Time Servers - ZyXEL Communications ZyWALL 5 User Manual

The ZyWALL can use this pre-defined list of time servers
regardless of the Time Protocol you select.
When the ZyWALL uses the pre-defined list of NTP time servers, it randomly selects one server and
tries to synchronize with it. If the synchronization fails, then the ZyWALL goes through the rest of the
list in order from the first one tried until either it is successful or all the pre-defined NTP time servers
have been tried.

21.5 Configuring Time and Date

To change your ZyWALL's time and date, click MAINTENANCE, then the Time and Date tab. The
screen appears as shown. Use this screen to configure the ZyWALL's time based on your local time
zone.
Maintenance

Table 21-4 Default Time Servers

ntp1.cs.wisc.edu
ntp1.gbg.netnod.se
ntp2.cs.wisc.edu
tock.usno.navy.mil
ntp3.cs.wisc.edu
ntp.cs.strath.ac.uk
ntp1.sp.se
time1.stupi.se
tick.stdtime.gov.tw
tock.stdtime.gov.tw
time.stdtime.gov.tw
ZyWALL 5 Internet Security Appliance
21-5