Remote Node Filter; Figure 24-9 Menu 11.5: Dial Backup Remote Node Filter - ZyXEL Communications ZyWALL 5 User Manual

Internet security appliance

Hide thumbs Also See for ZyWALL 5:

Table of Contents

ZyWALL 5 Internet Security Appliance

Enter an Expect string to match. After matching the Expect string, the

ZyWALL returns the string in the Send field.

Enter a string to send out after the Expect string is matched.

24.10 Remote Node Filter

Move the cursor to the field Edit Filter Sets in menu 11.1, and then press [SPACE BAR] to set the

value to Yes. Press [ENTER] to open

Use menu 11.5 to specify the filter set(s) to apply to the incoming and outgoing traffic between this

remote node and the ZyWALL to prevent certain packets from triggering calls. You can specify up to

four filter sets separated by commas, for example, 1, 5, 9, 12, in each filter field. Note that spaces are

accepted in this field. Please refer to the Filters chapter for more information on defining the filters.

Table 24-7 Menu 11.4: Remote Node Script

Menu 11.5 - Remote Node Filter

Input Filter Sets:

protocol filters=

device filters=

Output Filter Sets:

protocol filters=

device filters=

Call Filter Sets:

protocol filters=

device filters=

Enter here to CONFIRM or ESC to CANCEL:

WAN and Dial Backup Setup

Show Quick Links

Table of Contents