ZyWALL 5 Internet Security Appliance
6.5
Configuring Wireless LAN
If you are configuring the ZyWALL from a computer connected
to the wireless LAN and you change the ZyWALL's ESSID or WEP
settings, you will lose your wireless connection when you press
Apply to confirm. You must then change the wireless settings of
your computer to match the ZyWALL's new settings.
Click WIRELESS LAN to open the Wireless screen.
The following table describes the labels in this screen.
LABEL
Enable
The wireless LAN is turned off by default, before you enable the wireless LAN you should
Wireless LAN
configure some security by setting MAC filters and/or 802.1x security; otherwise your
wireless LAN will be vulnerable upon enabling it. Select the check box to enable the wireless
LAN.
6-4
Figure 6-3 Wireless
Table 6-1 Wireless
DESCRIPTION
Wireless LAN and Authentication Server