This chapter describes how to configure the WAN using menu 2 and dial-backup using menus 2.1
and 11.1. Dial-backup applies to the ZyWALL 100 and 10W (see Table 1-1 Model Specific
23.1 Introduction to WAN and Dial Backup Setup
This chapter explains how to configure settings for your WAN port and how to configure the ZyWALL for a
dial backup connection.
23.2 WAN Setup
From the main menu, enter 2 to open menu 2.
The following table describes the fields in this screen.
WAN and Dial Backup Setup
WAN and Dial Backup Setup
Menu 2 - WAN Setup
MAC Address:
Assigned By= Factory default
IP Address= N/A
Dial-Backup:
Active= No
Phone Number=
Port Speed= 115200
AT Command String:
Init= at&fs0=0
Edit Advanced Setup= No
Figure 23-1 MAC Address Cloning in WAN Setup
ZyWALL 10~100 Series Internet Security Gateway
Features in the Web Configuration User's Guide).
Chapter 23
23-1