This chapter describes how to configure the WAN using menu 2 and dial-backup using menus 2.1
24.1 Introduction to WAN and Dial Backup Setup
This chapter explains how to configure settings for your WAN port and how to configure the ZyWALL for a
dial backup connection.
24.2 WAN Setup
From the main menu, enter 2 to open menu 2.
Press Space Bar to Toggle.
The following table describes the fields in this screen.
WAN and Dial Backup Setup
WAN and Dial Backup Setup
Menu 2 - WAN Setup
MAC Address:
Assigned By= Factory default
IP Address= N/A
Dial-Backup:
Active= No
Phone Number=
Port Speed= 115200
AT Command String:
Init= at&fs0=0
Edit Advanced Setup= No
Press ENTER to Confirm or ESC to Cancel:
Figure 24-1 MAC Address Cloning in WAN Setup
Table 24-1 MAC Address Cloning in WAN Setup
ZyWALL Series Internet Security Gateway
Chapter 24
and 11.1.
24-1