ZyWALL 10 Internet Security Gateway
5.1
IP Static Route Setup
You configure IP static routes in Menu 12. 1, by selecting one of the IP static routes as shown below. Enter
12 from the Main Menu.
Now, enter the index number of one of the static routes you want to configure.
`The following table describes the IP Static Route Menu fields.
5-2
Menu 12 - IP Static Route Setup
1. ________
2. ________
3. ________
4. ________
5. ________
6. ________
7. ________
8. ________
Figure 5-2 Menu 12 - IP Static Route Setup
Menu 12.1 - Edit IP Static Route
Route #: 1
Route Name= ?
Active= No
Destination IP Address= ?
IP Subnet Mask= ?
Gateway IP Address= ?
Metric= 2
Private= No
Press ENTER to CONFIRM or ESC to CANCEL:
Figure 5-3 Menu 12. 1 - Edit IP Static Route
Enter selection number:
IP Static Route Setup