C External Floppy Disk Drive (Usb) Notes On Usage - Fujitsu PRIMERGY RX600 S4 User Manual

Appendix
C External Floppy Disk Drive (USB)
Notes on Usage
The section explains notes on the usage of USB connected floppy disk drive.
Notes on floppy disk drive recognition at server startup
If a USB floppy disk drive, with a floppy disk inserted, is not connected at server startup, BIOS cannot
recognize the USB floppy disk drive.
For the following situations, make sure to connect the USB floppy disk drive with a floppy disk inserted
before the server startup.
• When installing OS such as Windows
• When using Windows Automatic System Recovery (ASR)
• When using Disaster Recovery Option of BrightStor ARCserve Backup
Notes on floppy disk media exchange recognition when installing
Windows manually and at system recovery
When performing system recovery using Windows backup data with the following software, also when
installing Windows manually, the floppy disk media replacement is not recognized.
• BrightStor ARCserve Backup Disaster Recovery Option
• Windows Server 2003 Automatic System Recovery Function
Therefore, system recovery or installation may fail since the device driver is not loaded properly.
If the floppy disk access LED on the USB floppy disk drive is not lit and the floppy disk is not accessed
although you press the [Enter] key following the instruction on the screen, follow the procedure below.
1
Eject the floppy disk and wait for two seconds or longer, then press the [Enter]
key several times.
2
Insert the floppy disk and wait for two seconds or longer, then press the [Enter]
key.
3
If the floppy disk cannot be accessed, repeat the procedures above.
214