Switching Between User Frames - Fujitsu S120 Series Operating Manual

Using frames

6.3.2 Switching between user frames

A switch between the user frames is only possible within a specified scheme or via an FR
command.
The possible switches between the frames are illustrated below:
FR command
Figure 24: Switching between the frames
Explanation of Figure 24
The frames are represented by this symbol:
Frame ID
Each frame has an ID consisting of two letters derived from the frame name. In the
above example the MODE SELECTION FRAME is also shown with the ID ML.
Arrows and program function keys show where and with which key or combination of
keys you can switch to a frame.
46
ML MODE SELECTION FRAME
LD PROGRAM LOAD FRAME
ST STATUS DISPLAY FRAME
MA MANUAL OPERATION FRAME
AD ALTER/DISPLAY FRAME
ME MESSAGE FRAME
CH CH/SUBCH STATUS DISPLAY FRAME
AU AUXILIARY FRAME: MENU
1 REAL CLOCK
2 IORSF CONTROL
3 RELATED SCB'S
4 POWER STAND-BY/IMPL
5 LOAD PRESET
8 HEAD CLEANING
9 MEMORY RECONFIGURATION
MF MAINTENANCE SUPPORT FRAME
PA PERFORMANCE ANALYSER
MODE SELECTION FRAME
ML
Standard processing in SVP mode
Frame name
PF23 / F3
PF3 / P3
U41182-J-Z126-1-74