E.c.m. Function Setting [3] - Konica Minolta Di5510 User Manual

Key Operator Mode
ECM (Electronic Copy Monitor) Function Setting [4] (continued)

E.C.M. Function Setting [3]

Use this function to turn ECM On or Off and to select whether the copier/printer and
scanner will stop at the time the count limit is reached, or after the current copy job is
completed.
ECM Setting Menu Screen
1 Press [Help] to display the Help Screen, then touch Key Operator Mode .
Enter the 4-digit Key Operator password, then touch OK to display the Key Operator
Mode Screen. (See note 1.)
2 Touch [4] E.C.M. function setting . The ECM Master Key Code Screen displays, if a code
is required.
3 Enter your 8-digit ECM master key code, then touch OK to display the ECM Setting
Menu Screen. (See note 2.)
4 Touch [3] E.C.M. function setting . The ECM Function Setting Screen will be displayed.
5 Touch ECM On to activate ECM or touch ECM Off to de-activate ECM individually for
copier/printer and scanner.
The selected key will be highlighted.
6 Touch Immediately to stop the machine at once when the copy limit is reached.
In this case, copy conditions selected for the current job will be cleared. To continue the
job using the same user password, change the copy limit of the password or clear the
copy count.
Touch After job to stop the machine after the current job is completed, when copy limit is
reached.
Touch Warning only to display a warning message when copy limit is reached.
The selected key will be highlighted.
7 Touch OK to complete the setting and return to the ECM Setting Menu Screen. If other
ECM setting changes are required, touch the desired key, from [1]~[3].
8 Touch RETURN to restore the Key Operator Mode Screen.
9 Touch RETURN to return to the Basic Screen and perform copying operations.
NOTES: 1 If an invalid password is entered, enter the valid 4-digit password.
2 If an invalid ECM master key code is entered, continue by entering the valid 8-digit code.
ECM Function Setting Screen
13-23