E-Mail Transmission Setting [4] - Konica Minolta Di5510 User Manual

Key Operator Mode
System Initial Setting [1] (continued)

E-Mail Transmission Setting [4]

When the machine requires troubleshooting or maintenance such as paper or toner
supply, this setting allows several network PCs to be informed of the current machine
status by E-mail.
The following information items are provided.
• Service call
• JAM
• Paper supply
• Toner supply
NOTE: Consult your network manager to perform this setting. Incorrect setting may cause a trouble with other
network systems.
❒ Setting options: IP address; E-Mail (machine manager); E-Mail (condition inform), E-Mail
transmission item
System Initial Setting Menu Screen
1 Press [Help] to display the Help Screen, then touch Key Operator Mode .
Enter the 4-digit Key Operator password, then touch OK to display the Key Operator
Mode Screen.
NOTE: If an invalid password is entered, enter the valid 4-digit password.
2 Touch [1] System initial setting to display the System Initial Setting Menu Screen, then
touch [4] E-Mail Transmission Setting to display the E-Mail Transmission Setting
Screen.
3 Touch [1] IP address setting to display the
IP Address Setting Screen. Enter the IP
address of the mail address in your
network using screen keypad, then touch
OK to restore the E-Mail Transmission
Setting Screen.
• PM call
• Complete job
• Non complete job
• Staple cartridge supply
• Finisher tray full
• Dispose of trash basket
E-Mail Transmission Setting Screen
IP Address Setting Screen
13-9