Konica Minolta Di5510 User Manual page 263

Network Function
HDD Job Information Mode (continued)
Image Data Information
5 Check the image data information.
Click on [ Image ] on the right side of the desired job name to view the contents. The
reduced image of the first page of the selected data and detailed information will be
displayed.
Click on [ Output ] to print the image data. Proceed to step 6.
Choosing [ Back ] will resume the searched job list.
6 Output the image data.
Click on [ Output ] on the right side of the desired job name to print out the image data.
The Output Setting dialogue box will be displayed.
If the machine is using the ECM function, enter the 8-digit ECM password.
Choose [ Auto Output ], [ Proof Output ], or [ Wait Output ], as desired.
Click on [ Back ] to cancel the output setting.
NOTE: If incorrect ECM password is entered, the print job cannot be completed successfully and the
message displayed in the "Result of job print" dialogue box will inform you that the wrong password
was entered. See p. 13-16 for details of the ECM setting.
Selecting Auto output:
Enter the desired print quantity, then click on [ Apply ].
The machine starts to output the specified number of copied sets, then the "Result of job
print" dialogue box will appear when completed.
NOTE: The web browser does not allow you to cancel the printing job, if it is currently in progress. Use the
machine to stop printing.
Output Setting Dialogue Box
11-17