Konica Minolta Di5510 User Manual page 138

Basic Operations
Check Mode and Proof Copy (continued)
Change/Release Settings
If you want to change or release any settings, follow the procedure below.
To change the settings:
Check Screen
Basic Screen
1 Touch the desired copying condition key on the Mode Check Screen to highlight it.
NOTES: • Any key that cannot be highlighted indicates that the copying condition cannot be changed from the
Mode Check Screen.
• Although the following application functions can be highlighted, they cannot be changed but only
released by touching RELEASE SETTING: Overlay, Non-image area erase, Reverse image, AUTO
layout, All-Image Area.
2 Touch CHANGE SETTING . The LCD will display the appropriate screen to change the
copying condition selected.
• Selecting a basic copying condition key will display the Basic Screen.
• Selecting Enhance Mode, Special Orig., or Original key will display the Special
Original popup menu. (See Section 8.)
• Selecting an application function key will display the Change Application Selection
Screen.
When BOOK MARK has been checked on a subsequent screen, selecting the
application function key will jump to that screen. See p. 9-2 for details.
6-44