Section 4: Paper Information; Positioning Originals On The Platen Glass; Positioning An Original For Manual Copying - Konica Minolta Di5510 User Manual

Paper Information

Positioning Originals on the Platen Glass

Positioning an Original for Manual Copying

Use the platen glass when originals are not suitable for use with the EDH, e.g., when size
is incompatible, or when originals are folded, stapled, torn, or in generally poor condition.
Specifications
❒ Max. original size: 11"x17" (280 mm x 432 mm), sheet or book
❒ Max. book weight/thickness: 15 lb [6.8kg]/1.2" [30 mm]
❒ Original placement: Face down on right depth side of glass
1 Raise the EDH, as shown in the illustration below.
2 Place original FACE DOWN in the left rear corner, aligning the edge with the left and
rear measuring guides.
3 Gently close the EDH, to prevent the original from shifting on the glass.
CAUTION:
When the selected print quantity exceeds the Finisher's maximum capacity, remove the printed sheets
while paper is exiting to avoid paper mishandling.
TIP:
To eliminate black copy marks on edges when copying from a book without selecting Book Copy mode, select
Frame/Fold Erasure or Non-Image Area Erase in Application mode.
4-2