Konica Minolta Di5510 User Manual page 123

Basic Operations
Reserve (continued)
Set Reserve Job (continued)
1 Touch FREE JOB to display the Reserve Job Setting Screen.
2 Set the desired copying conditions for the reserve job.
When the Reserve Job Setting Screen is displayed, all keys on the LCD and Control
panel will function for the reserve job.
NOTE: When trouble occurs while setting the reserve job, the PRINT or SCAN JOB key changes to JAM/
ADD PAPER key on the Basic Screen. See p. 6-33 to p. 6-34.
3 Position original(s) FACE UP in the EDH or FACE DOWN on the platen glass after
completing scan for the current job.
4 Press [ Start ]. The original for the reserve job will be scanned.
NOTE: When the message "Please load size ** paper in any tray except tray #" is displayed, load the specified
paper into the appropriate trays.
5 Repeat step 1 to 4 to reserve more than one job.
When setting the fourth copying job, touch the active FREE JOB key at the far right to
scroll to the next reserve setting screen.
Up to nine reserve job settings are available.
6 When completed, the Basic Screen for the current printing job is restored.
To scroll to the next/previous screen, touch the arrow keys displayed at the right side of
the folder keys.
NOTE: When trouble occurs on a reserve job which is not currently displayed on the screen, the arrow key to
scroll to that job will blink. See p. 6-33 to p. 6-34.
7 Copying of the reserve job will start automatically after completing the current job.
6-29