Mishandled Paper During The Reserve Setting - Konica Minolta Di5510 User Manual

Basic Operations
Reserve (continued)

Mishandled Paper During the Reserve Setting

If a misfeed occurs with the print/scan job in progress while you are setting a reserve job,
the PRINT/SCAN JOB key on the screen will change to flashing JAM key.
When more than four jobs have been specified and the key of the print / scan job in trouble
is not currently displayed on the screen, the arrow key to scroll to than job will flash.
Basic Screen
If originals of the reserve job are already scanned when the misfeed occurs, the reserve
job printing can be performed after the jam is cleared and the cleared job is completed.
1 Touch JAM to display the Jam Position Screen.
When the arrow key flashes, touch the key to scroll to the JAM key, then touch it to
display the Jam Position Screen.
2 To view Help Screen instructions, touch GUIDE and remove paper/original.
3 The JAM will change to PRINT JOB or SCAN JOB .
4 Press [ Start ]. The print/scan job will be reprocessed.
5 Touch FREE JOB to continue setting the reserve job.
If scanning is not completed when the misfeed occurs, but reserve settings have already
been made, the reserve job can be performed after the cleared job is completed. Simply
insert the original document and press [ Start ].
6-33