Konica Minolta Di5510 User Manual page 204

Applications
Transparency Interleave (continued)
Application Selection Screen
1 Load copy paper in tray 1, 2, 3, 4, or LCC to match the size of transparencies.
2 Open the Multi-sheet bypass tray. Insert one transparency at a time into the Multi-sheet
bypass tray, and adjust the paper guides.
IMPORTANT: do not load transparencies into any other tray.
3 Touch APPLI. on the Basic Screen to display the Application Selection Screen.
4 Touch Transparency Interleave to display the Transparency Interleave Screen.
5 Touch Blank sheet Interleaving or Copy sheet Interleaving , unless it is already
highlighted.
6 Touch OK .
7 Make additional Application selections, or touch OK to return to the Basic Screen.
8 Print quantity is already set to 1. You cannot enter any other quantity.
9 Place original FACE UP in the EDH or FACE DOWN on the platen glass.
When using Platen store mode, see p. 6-35 to p. 6-36.
When using EDH store mode, see p. 6-37.
Option: Press [Mode Check] to view the selection, and make a Proof copy, if desired. Touch EXIT to return to
the Basic Screen. See p. 6-43 to p. 6-45.
10 Press [ Start ].
After copying is completed, touch Transparency Interleave on the Application Selection
Screen or press [ Panel Reset ] to release the mode and reset the machine.
9-16
Transparency Interleave Screen