Konica Minolta Di5510 User Manual page 21

Introduction
Features of the Di5510/Di7210 (continued)
• Non STD Size for Multi-Sheet Bypass Tray
Enters the special paper size to be loaded on the Multi-sheet bypass tray using the touch
screen keypad in order to avoid paper misfeed.
• Non STD Size for Original
Identifies the special original size which the Di5510/Di7210 cannot detect, in order to
select the optimal paper size for copying or printing.
• Output mode for Machine with FN-121/FN-10/FN-115 Finisher Installed:
Non-Sort, Sort, Staple-Sort, and Group modes using the primary (main) tray
Non-Sort Face Down exit, Non-Sort Face Up exit, Group Face Down exit, and
Group Face Up exit modes using the secondary (sub) tray
Folding, Stapling & Folding, and 3-Folding modes using the booklet tray (FN-10
only)
Selects an output tray and output mode on the Output Mode popup menu. For details of
each output mode, see Section 7: Output Modes.
• Output mode for Machine with OT-104 Shift Tray Installed:
Non-sort, Sort, and Group modes are available.
Selects an output mode on the Output Mode popup menu.
• Output mode for Machine with no Finisher Installed:
Non-sort, Rotation sort, Group, and Rotation group modes are available in combination
with Face down or Face up exit.
Selects an output mode on the Output Mode popup menu.
• Output mode for FN-121/FN-10 Finisher with Cover Inserter E Installed:
Cover Sheet mode
Manual Staple mode
For details of each output mode, see Section 7: Output Modes.
• Overlay
Imprints a scanned image onto the copy image.
• Overlay Memory
Stores the overlaying image in HDD and prints a stored image onto the copy image.
• Panel Reset
Automatically resets to auto mode defaults after a specified period of copier inactivity.
1-9