Table of Contents
Advertisement
Network Function
Image Store/Delete Mode (continued)
To Store Image Data in HDD (continued)
6 Select the desired scanning conditions. Print quantity cannot be entered.
7 Position original(s) FACE UP in the EDH or FACE DOWN on the platen glass.
When using Platen store mode, see p. 6-35 to p. 6-36.
When using EDH store mode, see p. 6-37.
8 Press [Start] to scan original(s).
When scanning is completed, the Image Data Storing Screen will be displayed.
When Store mode is used, touch to deselect STORE on the Scanner Setting Screen
after all originals are scanned. The Image Data Storing Screen will be displayed.
9 The machine automatically begins storing data in the HDD. The Basic Screen displayd
"SCANNER ! HDD" icon resumes when the storing function is completed.
NOTE: To suspend the storing job, touch CANCEL on
the Image Data Storing Screen. If the popup
menu shown below is displayed, touch YES to
delete the data, or touch NO to continue. The
popup menu displays when the Memory Switch
No. 43 is turned on in the Key Operator Mode.
See p. 13-41 to p. 13-48.
11-6
Image Data Storing Screen (popup menu displayed)
Advertisement
Chapters
Table of Contents
Troubleshooting
