Network Function
To Use Server Function
Use Server function to accumulate scanned images into built-in DIMM (memory), then
store the image data in HDD (option) so that the data can be recalled to DIMM and output
as needed. This function also allows you to store the image data for normal copying
procedures.
NOTE: Installation of the optional HDD (HDD-2) is required for the Server function with HDD.
The Server function provides the following four modes:
(1) Image Store/Delete mode
Store the image data scanned from originals in HDD, or delete the data stored in HDD.
11-2
Scan
Output
DIMM
Store
Recall
HDD
Server Function