Konica Minolta Di5510 User Manual page 120

Basic Operations
Copy Size (continued)
Selecting Paper Type/Size for Multi-sheet Bypass Tray (continued)
Paper Type/Size popup menu
Paper Type/Size popup menu
• When Wide paper is highlighted, the popup menu will appear.
Use arrows to scroll to the desired wide size, then specify the precise dimensions of
paper to be used, following the procedure below.
(1) Touch Input size . The Size Input popup menu will appear.
(2) Touch the vertical size key to highlight it, then use the keypad on the popup menu
to enter the vertical size, or use arrows to scroll to that number.
The entered number should fall within the range from the vertical size of the
standard size corresponding to the selected wide size, to a maximum of 314 mm.
(3) Similarly, touch the horizontal size key to highlight it, then use the keypad on the
popup menu to enter the horizontal size, or use arrows to scroll that number.
The entered number should fall within the range from the horizontal size of the
standard size corresponding to the selected wide size, to a maximum of 459 mm.
(4) Touch Select size to return to the Select Size popup menu.
Touch Lead edge or Rear edge to select the image starting position.
4 Touch OK to return to the Basic Screen.
6-26