Section 1: Introduction; To The User; Key Operator Functions; Copier Service, Repairs & Supplies - Konica Minolta Di5510 User Manual

Introduction

To the User

Welcome to the Di5510/Di7210. The following topics relate to general product information
and provide tips on using this manual.

Key Operator Functions

Custom settings can be made by the Key Operator or anyone who is responsible for the
machine. Access to the Key Operator mode may require a key operator password, if
previously set by your authorized service representative. Use the password system to limit
use of Key Operator functions to a person who is authorized to handle the responsibility.
Copier Service, Repairs & Supplies
Copier service and repairs should be performed only by an authorized service
representative. To maintain personal safety and to avoid machine damage, never
disassemble the machine for any reason. To ensure optimal copy quality, use only supplies
that are recommended by Konica Minolta Business Technolojies Inc. For convenience, use
the form located at the end of Section 14: Maintenance & Supplies to record all service,
repair, and supply orders.

Machine Labels

Information labels are affixed to the copier to provide quick and easy instructions on basic
copying, loading paper, adding toner, and clearing mishandled paper. In addition, safety
labels are attached to various internal areas of the copier, to provide cautionary
information that must be heeded to prevent personal injury or damage to the copier.
Sample machine safety labels are shown in Section 2: Safety Information.

Control Panel with Interactive Touch Screen

The Di5510/Di7210 control panel is user friendly and easy to operate. The far right portion
of the panel displays the Copy/Scan/Print indicator and keys to select the mode as well as
the Timer indicator and buttons to select Energy Saver, Interrupt and Panel Reset modes.
Adjacent to this section is the keypad to select Print Quantity, Clear Quantity and Stop.
The next section on the left displays the keys to select Help, Program Memory, Mode
Check, Utility and Proof Copy modes. To the left is the LCD screen.
Copying modes, selections, and setting changes can be made from the touch screen. The
upper portion of the touch panel automatically displays machine status information, as
required. In addition, the [Help] key will display information on each function that is
displayed on the screen and will provide step-by-step instructions.
1-2