Folding And Stapling & Folding Modes - Konica Minolta Di5510 User Manual

Output Modes
Folding and Stapling & Folding Modes
The Folding and Stapling & Folding modes are available only when the FN-10 Finisher
option is installed. When any mode is selected, the Booklet feature is automatically
selected and indicated on the Application Selection Screen.
NOTES:1 When copying two-sided signature originals using the Folding or Stapling & Folding mode, release the
automatically selected Booklet mode on the Application Selection Screen.
2 When copying dark originals or using Reverse Image mode together with Folding or Stapling & Folding
mode, the folded line of the output copies may be slightly shifted.
The following copy results may be expected when using Folding or Stapling & Folding
mode:
In the Folding mode, each copied set is folded and output to the Booklet tray of the
finisher.
In the Stapling & Folding mode, each copied set is stapled at two positions (saddle
stitched), then folded and output to the Booklet tray of the finisher.
❒ Use EDH.
❒ Max. number of folded sheets (20 lb Bond) in both modes:
Folding: 3 sheets (less than in Staple & Folding mode because they are not cinched first)
Stapling & Folding: 20 sheets
❒ Paper size: 11"x17", 8.5"x14", 8.5"x11"R, A4R
❒ Paper weight: 16 ~ 24 lb; Special stock (20 lb paper is recommended)
❒ Booklet tray capacity:
When the Booklet tray capacity is exceeded, the finisher will stop operating. Select the
appropriate print quantity by referring to the following capacities.
Approx. 100 sheets max.
Folding:
Stapling & Folding: 20 sets max. of 5-sheet-folded booklet (20 x 5 = 100 sheets)
Approx. 75 sheets max. (8.5"x11"R, A4R)
Folding:
Stapling & Folding: 15 sets max. of 5-sheet-folded booklet (15 x 5 = 75 sheets)
❒ Incompatible Basic Copying Conditions with Booklet selected: APS, 1-1, 2-1, Rotation, Sort,
Staple-sort, Group, Cover sheet feeding, Three-Folding, Z-Folding, Rotation Sort, Rotation
Group, Punch
❒ Incompatible Special Originals with Booklet selected: Mixed Original, Whole Area in Non STD
size, Tab Paper
❒ Incompatible Applications with Booklet selected: Sheet/Cover Insertion, Combination,
Transparency Interleave, Program Job, Non-Image Area Erase, Reverse Image, Repeat
❒ Incompatible conditions without Booklet: Sort, Staple-sort, Group, Rotation Sort, Rotation Group,
Three-Folding, Punch, Z-Folding, Transparency Interleave, Reverse Image
7-14
19 sheets when using thick cover paper
33 sets max. of 3-sheet-folded booklet (33 x 3 = 99 sheets)
6 sets max. of 15-sheet-folded booklet (6 x 15 = 90 sheets)
25 sets max. of 3-sheet-folded booklet (25 x 3 = 75 sheets)