Page 1 Di1611/Di2011 Advanced Information...
Page 3: Table Of Contents
For Denmark Users ..............1-11 For Finland, Sweden Users ............1-12 For Norway Users..............1-12 Laser Safety Label..............1-13 Ozone Release.................1-13 Acoustic Noise................1-13 Precautions Installation Precautions..............2-1 Installation Site ................2-1 Power Source ................2-1 Space Requirements ..............2-2 Operation Precautions..............2-3 Operating Environment...............2-3 Proper Use .................2-3 Transporting the Machine............2-5 Di1611/Di2011...
Page 4 Positioning transparent documents on the Original Glass ..3-10 Positioning books on the Original Glass ........3-11 Loading documents of mixed sizes in the Document Feeder .. 3-12 Stopping/Restarting/Cancelling a Copy Job......3-14 Confirmation Mode..............3-15 To check the counters.............. 3-15 Reducing Electricity Usage ............3-17 Di1611/Di2011...
Page 5 To copy with a manually selected paper size ......5-22 To load special paper into the 1st Tray ........5-22 Automatically Selecting the Paper Source .......5-23 Order for Automatically Switching Paper Drawers ....5-24 Original Documents ..............5-25 Using the Document Feeder.............5-25 Document Types ..............5-25 Di1611/Di2011...
Page 6 Negative/Positive Inverted Copying ......... 6-15 To make copies using the negative/positive inverted copy function ................6-15 Making Copies for Filing (“File Margin” function)....6-16 Precautions on the Binding Margin Location ......6-16 To make copies using the “File Margin” function ..... 6-17 Di1611/Di2011...
Page 7 To turn on/off user (section) management .......7-26 To register user (section) access numbers ......7-27 To change/delete user (section) access numbers....7-29 To display/clear the total count for a specific account ....7-31 To clear the total counts for all accounts ........7-33 Di1611/Di2011...
Page 8 To clear a misfeed in the Automatic Document Feeder (AF-12) ..................8-11 To clear a misfeed in the Duplexing Document Feeder (AFR-19) .................. 8-13 Main Error Messages and Their Remedies ......8-15 Troubleshooting When Incorrect Copies Are Produced........9-1 When Copying Is Not Performed Correctly........ 9-3 Di1611/Di2011...
Page 9 Housing ..................10-6 Original Glass ................10-6 Document Pad................10-6 Control Panel................10-7 10.3 Function Combination Table............10-8 Function Combination Table for Di1611 ........10-8 Function Combination Table for Di2011 ........10-9 Function Combination Codes ..........10-10 10.4 Paper Size and Zoom Ratio Tables .........10-11 Copy Paper Sizes..............10-11 Zoom Ratios ................10-12...
Page 10 Di1611/Di2011...
Page 11: Introduction
Observe all cautions in order to ensure safe use of the copier. Note* (*May also appear as “Important” or “Tip”) Text highlighted in this manner contains useful information and tips to ensure safe use of the machine. Di1611/Di2011...
Page 12 Text formatted in this style provides additional assistance. Text formatted in this style describes the action that will ensure the desired results are achieved. [Copy] key The names of keys on the control panel are written as shown above. Di1611/Di2011...
Page 13: Explanation Of Basic Concepts And Symbols
“Width” and “Length” Whenever paper dimensions are mentioned in this manual, the first value always refers to the width of the paper (shown as “X” in the illustration) and the second to the length (shown as “Y”). Di1611/Di2011...
Page 14: Paper Orientation
(Y), the paper has a vertical or portrait orientation, indicated by either “L” or Crosswise ( If the width (X) of the paper is longer than the length (Y), the paper has a horizontal or landscape orientation, indicated by either “C” or Di1611/Di2011...
Page 15: Energy Star
“low-power mode” after a period of inactivity. An ® ENERGY STAR product uses energy more efficiently, saves you money on utility bills and helps protect the environment. Di1611/Di2011...
Page 16: Safety Information
This symbol warns against cause burns. A diagonal line indicates a prohibited course of action. This symbol warns against dismantling the device. A black circle indicates an imperative course of action. This symbol indicates you must unplug the device. Di1611/Di2011...
Page 17: Warning
If you keep on using it as is, a fire or electrical shock could result. Do not throw the toner cartridge or toner into an open flame. The hot toner may scatter and cause burns or other damage. Di1611/Di2011...
Page 18: Caution
Dust that accumulates between the plug terminals may cause a fire. • When unplugging the power cord, be sure to hold onto the plug. Pulling on the power cord could damage the cord, resulting in a fire or electrical shock. Di1611/Di2011...
Page 19: Precautions For Routine Use
This declaration is valid for the area of the European Union. This device must be used with shielded interface cables. The use of non- shielded cable is likely to result in interference with radio communications and is prohibited under EU directives. Di1611/Di2011...
Page 20: Laser Safety
The laser diode and the scanning polygon mirror are incorporated in the print head unit. The print head unit is NOT A FIELD SERVICE ITEM: Therefore, the print head unit should not be opened under any circumstances. Print Head Laser Aperture of the Print Head Unit 1-10 Di1611/Di2011...
Page 21: Cdrh Regulation
Usynlig laserstråling ved åbning, når sikkerhedsafbrydere er ude af funktion. Undgå udsættelse for stråling. Klasse 1 laser produkt der opfylder IEC60825 sikkerheds kravene. Dansk: Dette er en halvlederlaser. Laserdiodens højeste styrke er 5mW og bølgelængden er 770-795 nm. Di1611/Di2011 1-11...
Page 22: For Finland, Sweden Users
Dersom apparatet brukes på annen måte enn spesifisert i denne bruksanvisning, kan brukeren utsettes for unsynlig laserstråling som overskrider grensen for laser klass 1. Dette en halvleder laser. Maksimal effekt till laserdiode er 5mW og bølgelengde er 770-795 nm. 1-12 Di1611/Di2011...
Page 23: Laser Safety Label
Acoustic Noise For European Users Machine Noise Regulation 3 GSGV, 18.01.1991: The sound pressure level at the operator position according to EN 27779 is equal to or less than 70dB(A). Di1611/Di2011 1-13...
Page 24 Introduction 1-14 Di1611/Di2011...
Page 25: Precautions
A location that is not near any kind of heating devices Power Source The power source requirements are as follows. Voltage fluctuation: Maximum ±10% Frequency fluctuation: Maximum ±3 Hz Use a power source with as little voltage or frequency fluctuations as possible. Di1611/Di2011...
Page 26: Space Requirements
Precautions Space Requirements To ensure easy machine operation, supply replacement, and maintenance, adhere to the recommended space requirements detailed below. Di1611 1099 1024 *100 **400 Di2011 1099 1069 **400 *100 Unit: mm Note Since there is a ventilation duct on the left side of the machine, be sure to allow a clearance of *100 mm or more on the left side.
Page 27: Operation Precautions
If the ventilation duct on the left side of the machine is blocked, the inside of the machine will accumulate heat, resulting in a malfunction or fire. Be sure to allow a clearance of 100 mm or more on the left side of the machine for the ventilation duct. Di1611/Di2011...
Page 28 Be especially careful not to touch parts marked with warning labels, and their surrounding areas. If you get burnt, immediately cool the skin under cold water, and then seek professional medical advice. Di1611/Di2011...
Page 29: Transporting The Machine
Copies that are to be kept for a long time should be kept where they are not exposed to light in order to prevent them from fading. Adhesive that contains solvent (e.g., spray glue) may dissolve the toner on copies. Di1611/Di2011...
Page 30: Legal Restrictions On Copying
Copyrighted works without permission of the copyright owner In addition, it is prohibited under any circumstances to copy domestic or foreign currencies, or works of art without permission of the copyright owner. When in doubt about the nature of a document, consult with legal counsel. Di1611/Di2011...
Page 31: Components And Their Functions
(optional) Paper Feed Unit PF-126 Equipped with a paper drawer that can supply 250 sheets (optional: Di1611 Up to of paper, for upper paper feed unit only. one, Di2011 Up to four) Also referred to as the “Paper Feed Unit” throughout the manual.
Page 32 Windows or a NetWare (optional)* network environment is possible. Shifting Unit Shifts copies and printed pages that are fed out. If the OT-103 (optional)* Job Separator is installed, the Shifting Unit cannot be attached. * The internal options are not shown. Di1611/Di2011...
Page 33: Part Names And Their Functions
Manual Bypass • Used for manual feeding of paper. • The paper is fed one sheet at a time. • Can be loaded with special paper. (p. 5-7) Lock Release Lever Used to open and close the Side Cover. Di1611/Di2011...
Page 34 When manually feeding a document, position it on the Original Glass so that it can be scanned. Position the document face down on the glass. (p. 3-9) Control Panel Used to start copying or to make various settings. (p. 2-16) 2-10 Di1611/Di2011...
Page 35: Inside Of Main Unit
Creates the copy image. Replacement of the Imaging Unit must be performed by a service representative. Toner Bottle Holder Opened when replacing the toner bottle. Pressure Lever Used when clearing paper misfeeds in the fusing unit. (p. 8-4) Di1611/Di2011 2-11...
Page 36: Document Feeder (Optional)
Document Guide Plate Adjusted to the width of the document. (p. 3-8) Document Feeder Cover Opened when clearing document misfeeds. (p. 8-11) (Doc. Feed Cover) Document Feeder Tray Holds the documents to be scanned; load documents face up. (p. 3-8) 2-12 Di1611/Di2011...
Page 37: Multiple Bypass (Optional)
Precautions Multiple Bypass (Optional) Part Name Description Bypass Tray Holds up to 100 sheets of plain paper, 20 sheets of special paper, or 10 envelopes. (p. 5-9) Bypass Tray Extender Pulled out when large-sized paper is loaded. Di1611/Di2011 2-13...
Page 38: Paper Feed Unit (Optional)
Holds up to 250 sheets of plain paper. With the Di2011, up to four Paper Feed Units can be 3rd Tray installed. With the Di1611, one Paper Feed Unit can be installed. 4th Tray 5th Tray Side Cover Opened when clearing paper misfeeds. (p. 8-8)
Page 39: Job Separator (Optional)
Precautions Job Separator (Optional) With the Job Separator installed Part Name Description Copy Tray Lamp Lights up when paper is fed into the Upper Copy Tray. Upper Copy Tray Collects computer printouts. Lower Copy Tray Collects copies. Di1611/Di2011 2-15...
Page 40: Names Of Control Panel Parts And Their Functions
• With each press, a zoom ratio between × 0.50 and × 2.00 is selected in 0.01 increments. • Used to specify the selection above or below in setting screens and menus. [Paper] key Used to select the size of the paper to be printed on. 2-16 Di1611/Di2011...
Page 41 • Copy programs can be stored. • Stored copy programs can be selected and recalled. [Book Separation] key Used to select the “Book Separation” function. [Original] key Used to select between the “Duplex Orig.” function and the “Mixed Orig.” function. Di1611/Di2011 2-17...
Page 42 10-Key Pad • Used to specify the number of copies. • Used to enter setting values. • The [ ] and [#] keys do not function on this machine. 2-18 Di1611/Di2011...
Page 43: Display Indications
“AUTO” or the current zoom ratio setting is displayed. “× [X/Y]” indicates that the “X/Y Zoom” function is selected. Menu or function name • Displays the current menu, function or settings. • Error messages are displayed when errors occur. Messages Displays messages such as operating instructions. Di1611/Di2011 2-19...
Page 44: Adjusting The Angle Of The Display
The display can be adjusted to any of three angles. Adjust the display to the angle that allows for easy operation. Press an edge of the display to adjust it to the desired angle. Middle position Upper position Lower position 2-20 Di1611/Di2011...
Page 45: Power Supply
Copy density: AUTO Zoom ratio: Full size (× 1.00) Paper source: AUTO (with the Document Feeder installed) Finishing function: Non-sort The default settings can be customized using the functions in the Utility mode (“7 Utility Mode – Copy Functions”). Di1611/Di2011 2-21...
Page 46: Auto Panel Reset
(Manufacturer’s default setting: 15 minutes) The length of time until the machine enters Energy Save mode can be set between 1 and 240 minutes. (Refer to “To set the “ENERGY SAVE MODE” (preheat mode) function” on page 7-6.) 2-22 Di1611/Di2011...
Page 47: Auto Shut Off
Copy jobs can be queued by loading the document and pressing the [Start] key while “PLEASE WAIT!” appears in the display. When the indicator on the [Start] key lights up in green, scanning of the loaded document begins, and copies are produced. Di1611/Di2011 2-23...
Page 48 Precautions 2-24 Di1611/Di2011...
Page 49: Basic Operations
Copy density (p. 5-34) Advanced Copy Operations (p. 6-1) Using the 10-Key Pad, enter the desired number of copies. The number of copies can be set to any number between 1 and To clear the entered value, press the [No] key. Di1611/Di2011...
Page 50 Basic Operations Press the [Start] key. The set number of copies are made. To stop copying before the set number of copies have been made, press the [Stop] key. Di1611/Di2011...
Page 51: Loading Paper
Make sure that the paper guides are pushed up against the edges of the paper. We recommend replenishing the paper only after all of the paper in the drawer has been used. Di1611/Di2011...
Page 52: Loading Paper Into The 1St Paper Tray
Slide the paper guides against the edges of the paper. Is the paper guide positioned correctly? Make sure that the paper guides are pushed up against the edges of the paper. Di1611/Di2011...
Page 53 Basic Operations Close the 1st Tray. Di1611/Di2011...
Page 54: Loading Paper Into The 2Nd Paper Tray
Slide the paper guides against the edges of the paper. Is the paper guide positioned correctly? Make sure that the paper guides are pushed up against the edges of the paper. Di1611/Di2011...
Page 55 Basic Operations Close the 2nd Tray. Di1611/Di2011...
Page 56: Loading The Document
Note Be sure to load the document correctly, otherwise the pages may not be fed in straight. If necessary, specify any other copy settings. Before Making Copies (p. 5-1) Advanced Copy Operations (p. 6-1) Press the [Start] key. Di1611/Di2011...
Page 57: Positioning Sheet Documents On The Original Glass
Original Glass. Carefully close the Original Cover, or the Automatic Document Feeder if it is installed. If necessary, specify any other copy settings. Before Making Copies (p. 5-1) Advanced Copy Operations (p. 6-1) Press the [Start] key. Di1611/Di2011...
Page 58: Positioning Transparent Documents On The Original Glass
Carefully close the Original Cover, or the Document Feeder if it is installed. If necessary, specify any other copy settings. Before Making Copies (p. 5-1) Advanced Copy Operations (p. 6-1) Press the [Start] key. 3-10 Di1611/Di2011...
Page 59: Positioning Books On The Original Glass
Carefully close the Original Cover, or the Document Feeder if it is installed. Press the [Book Separation] key. The “Book Separation” indicator lights up. If necessary, specify any other copy settings. Before Making Copies (p. 5-1) Advanced Copy Operations (p. 6-1) Press the [Start] key. Di1611/Di2011 3-11...
Page 60: Loading Documents Of Mixed Sizes In The Document Feeder
A maximum of 50 document pages can be loaded. (With AF-12) A maximum of 80 document pages can be loaded. (With AFR-19) Do not load so many pages that the top of the stack is higher than mark. 3-12 Di1611/Di2011...
Page 61 Press the [Original] key twice. The “Mixed Orig.” indicator lights Press the [Auto Paper/Auto Size] key until the Auto Paper function is selected. Check that “AUTO” appears in the bottom line of the screen. Press the [Start] key. Di1611/Di2011 3-13...
Page 62: Stopping/Restarting/Cancelling A Copy Job
[Start] key. Cancel Printing continues. How can the stopped job be cancelled? When the message “PRESS THE START KEY TO RESUME” appears, press the [No] key. The message “COPY CANCELED” appears, and the job is cancelled. 3-14 Di1611/Di2011...
Page 63: Confirmation Mode
This count shows the total number of scans made since this machine was installed. However, the number of pages scanned while making copies is not included. To check the counters Press the [Status] key, and then press the [Yes] key. The machine counter menu appears. Di1611/Di2011 3-15...
Page 64 Basic Operations Using the keys, select the counter that you wish to check. Press the [Yes] key. The “TOTAL PAGE?” appears. Press the [No] key. The main screen appears. 3-16 Di1611/Di2011...
Page 65: Reducing Electricity Usage
[Yes] key. The timer can be set between 15 min and 240 min. If you wish to correct the setting, press the [No] key, and then enter the new number. Di1611/Di2011 3-17...
Page 66 If the “AUTO SHUT OFF” function in the “ADMIN.MANAGEMENT” menu is set to “ENABLE”, the screen shown at the right appears. Press the keys to select “ON”, and then press the [Yes] key. Press the [No] key. The main screen appears. 3-18 Di1611/Di2011...
Page 67: Useful Operations
If “AUTO” is not displayed, press the [Paper] key until “AUTO” is displayed. For details on changing the paper size setting for the paper tray, refer to “Setting Up the Paper Sources (“PAPER SOURCE SETUP” Menu)” on page 7-13. Di1611/Di2011...
Page 68 Useful Operations If necessary, specify any other copy settings. Before Making Copies (p. 5-1) Advanced Copy Operations (p. 6-1) Press the [Start] key. Note When making copies using the Manual Bypass, continue loading paper into the tray. Di1611/Di2011...
Page 69: Using The "Auto/Photo" Function
Refer to “Loading the Document” on page 3-8. Press the [Auto/Photo] key. Select either “PHOTO” or “TEXT/P”. Press the key to adjust the density. Select the appropriate density for the color and density of the text and paper of the document. Di1611/Di2011...
Page 70 If necessary, specify any other copy settings. Before Making Copies (p. 5-1) Advanced Copy Operations (p. 6-1) Press the [Start] key. Note When making copies using the Manual Bypass, continue loading paper into the tray. Di1611/Di2011...
Page 71: Copying Onto Various Types Of Media
Load OHP transparencies in the same orientation as the document. Note A maximum of 20 OHP transparencies can be loaded. Press the [Utility] key twice. The “PAPE SOURCE SETUP” menu appears. From the 10-Key Pad, press the [2] key. “TRAY1 PAPER” appears. Di1611/Di2011...
Page 72 Press the [No] key. The main screen appears. Press the [Paper] key to select the paper loaded into the 1st Tray. If necessary, specify any other copy settings. Before Making Copies (p. 5-1) Advanced Copy Operations (p. 6-1) Press the [Start] key. Di1611/Di2011...
Page 73: To Copy Onto Label Sheets
Load label sheets so that the surface to be printed on faces upward, as shown in the illustration. Press the [Utility] key twice. The “PAPER SOURCE SETUP” menu appears. From the 10-Key Pad, press the [2] key. “TRAY1 PAPER” appears. Di1611/Di2011...
Page 74 Press the [No] key. The main screen appears. Press the [Paper] key to select the paper loaded into the 1st Tray. If necessary, specify any other copy settings. Before Making Copies (p. 5-1) Advanced Copy Operations (p. 6-1) Press the [Start] key. Di1611/Di2011...
Page 75: To Copy Onto Envelopes (Non-Standard Size)
Before loading envelopes, press them down to make sure that all air is removed, and make sure that the folds of the flaps are firmly pressed. With the Manual Bypass, only one envelope can be loaded at a time. Di1611/Di2011...
Page 76 The length of the paper (x) can be set between 140 mm and 432 mm. To correct the entered value, press the [No] key. Refer to the diagram at the right and be sure to specify the paper width and length measurements correctly. 4-10 Di1611/Di2011...
Page 77 The main screen appears. If necessary, specify any other copy settings. Before Making Copies (p. 5-1) Advanced Copy Operations (p. 6-1) Press the [Start] key. Note When making copies using the Manual Bypass, continue loading paper into the tray. Di1611/Di2011 4-11...
Page 78: To Copy Onto Postcards
Note Load postcards so that the surface to be printed on faces downward. With the Manual Bypass, only one postcards can be loaded at a time. Press the [No] key. The “PAPER SOURCE SETUP” menu appears. 4-12 Di1611/Di2011...
Page 79 Using the 10-Key Pad, type in “100” for the width (y). The width of the paper (y) can be set between 90 mm and 297 mm. To correct the entered value, press the [No] key. Di1611/Di2011 4-13...
Page 80 The main screen appears. If necessary, specify any other copy settings. Before Making Copies (p. 5-1) Advanced Copy Operations (p. 6-1) Press the [Start] key. Note When making copies using the Manual Bypass, continue loading paper into the tray. 4-14 Di1611/Di2011...
Page 81: Before Making Copies
2nd paper drawer — — — — 3rd paper drawer — — — — 4th paper drawer — — — — 5th paper drawer — — — — Double-sided copies — — — — 2: Available —: Not available Di1611/Di2011...
Page 82 The 2nd paper drawer, the 3rd paper drawer, the 4th paper drawer, the 5th paper drawer and the Multiple Bypass are optional. If the optional Duplex Unit is used to make double-sided copies, only plain and recycled paper can be used. Di1611/Di2011...
Page 83: Paper Sizes
The 2nd paper drawer, the 3rd paper drawer, the 4th paper drawer, the 5th paper drawer and the Multiple Bypass are optional. If the optional Duplex Unit is used to make double-sided copies, only plain and recycled paper can be used. Di1611/Di2011...
Page 84: Paper Capacity
The 2nd paper drawer, the 3rd paper drawer, the 4th paper drawer, the 5th paper drawer and the Multiple Bypass are optional. If the optional Duplex Unit is used to make double-sided copies, only plain and recycled paper can be used. Di1611/Di2011...
Page 85: Unsuitable Paper
Paper of a non-standard shape (not rectangular) Paper that is bound with glue, staples or paper clips Paper with labels attached Paper with ribbons, hooks, buttons, etc. attached Curled or wrinkled paper Art paper, coated paper or inkjet printer paper Di1611/Di2011...
Page 86: Print Area
Not exposed to direct sunlight Not exposed to a flame Not exposed to high humidity Not extremely dusty Unwrapped paper should be placed in a plastic bag and stored in a cool, dark location. Keep paper out of the reach of children. Di1611/Di2011...
Page 87: Making Copies On Manually Fed Paper
Note When copying using the Manual Bypass, only one page at a time can be loaded. For details on the number of pages that can be loaded into the Multiple Bypass (optional), refer to “Paper Capacity” on page 5-4. Di1611/Di2011...
Page 88: Adjusting The Multiple Bypass
Before Making Copies Adjusting the Multiple Bypass Adjust the Bypass Tray Extender to fit the size of the paper as shown below. Di1611/Di2011...
Page 89: Loading Plain Paper Into The Bypass Trays
Load the paper so that the front side of the paper faces down. Make sure that the paper is not curled (rolled). Adjust the Bypass Tray Extender and the paper guides to fit the size of the paper. Di1611/Di2011...
Page 90: Loading Postcards Into The Bypass Trays
Note Do not load postcards crosswise. After you have loaded the postcards, use the control panel to specify the paper size and paper type for the Bypass Tray. 5-10 Di1611/Di2011...
Page 91: Loading Envelopes Into The Bypass Trays
After you have loaded the envelopes, use the control panel to specify the paper size and paper type for the Bypass Tray. Di1611/Di2011 5-11...
Page 92 Before Making Copies Note Do not load envelopes crosswise. Do not load envelopes with the flap facing down. Do not load envelopes with the flap facing backwards. 5-12 Di1611/Di2011...
Page 93: Loading Ohp Transparencies Into The Bypass Trays
Up to 20 sheets of paper can be loaded into the Multiple Bypass. When loading OHP transparencies, load them in the same orientation as the document. Note After you have loaded the transparencies, use the control panel to specify the paper size and paper type for the Bypass Tray. Di1611/Di2011 5-13...
Page 94: Loading Label Sheets Into The Bypass Trays
When loading label sheets, load them in the same orientation as the document. Place documents with the side to be printed facing down. Note After you have loaded the label sheets, use the control panel to specify the paper size and paper type for the Bypass Tray. 5-14 Di1611/Di2011...
Page 95: Copying Onto Manually Fed Paper By Manual Bypass
Press the [No] key. The “PAPER SOURCE SETUP” menu appears. Use the keys to select the type of paper loaded. Select from the following four paper type settings. “PLAIN” “OHP” “CARD” “ENVELOPE” Press the [Yes] key. The “PAPER SIZE” menu appears. Di1611/Di2011 5-15...
Page 96 Manual Bypass to begin making copies automatically. To make continuous copies onto cards, postcards, OHP transparencies or envelopes, load them into the 1st Tray. If paper other than plain paper is specified and the Manual Bypass is used, the screen changes as shown below. 5-16 Di1611/Di2011...
Page 97 Before Making Copies Cards OHP transparencies Postcards or envelopes Di1611/Di2011 5-17...
Page 98: Copying Onto Manually Fed Paper By Multiple Bypass
“YES/NO” is displayed for approximately 5 seconds after paper is loaded into the Multiple Bypass. Use the keys to select the type of paper loaded. Select from the following four paper type settings. “PLAIN” “OHP” “CARD” “ENVELOPE” Press the [Yes] key. The PAPER SIZE menu appears. 5-18 Di1611/Di2011...
Page 99 If necessary, specify any other copy settings. Zoom (p. 5-28) Copy density (p. 5-34) Advanced Copy Operations (p. 6-1) Press the [Start] key. If paper other than plain paper is specified and the Multiple Bypass is used, the screen changes as shown below. Di1611/Di2011 5-19...
Page 100 Before Making Copies Cards OHP transparencies Postcards or envelopes 5-20 Di1611/Di2011...
Page 101: Selecting The Paper Source
[Start] key is pressed, no tray is loaded with paper of the most suitable size. Either load paper with the appropriate size, or press the [Paper] key and select the desired paper size, and then press the [Start] key again. Di1611/Di2011 5-21...
Page 102: To Copy With A Manually Selected Paper Size
“PAPER SOURCE SETUP” menu of the Utility mode (“To specify the size of paper loaded into the 1st Tray (“TRAY1 PAPER” function)” on page 7-16). Depending on the paper type set for the “TRAY1 PAPER” function, the screen changes as shown below. Cards OHP transparencies Postcards or envelopes 5-22 Di1611/Di2011...
Page 103: Automatically Selecting The Paper Source
If there is no paper in any paper drawer, a message appears indicating that paper must be replenished. Copying may not continue if paper is loaded into other paper drawers than the one specified in the message. Di1611/Di2011 5-23...
Page 104: Order For Automatically Switching Paper Drawers
For the 1st paper drawer, change the paper type using the “TRAY1 PAPER” function on the “PAPER SOURCE SETUP” menu of the Utility mode (p. 7-16). For the Multiple Bypass, specify the paper type after loading the paper (p. 5-15). 5-24 Di1611/Di2011...
Page 105: Original Documents
Using an incorrect type of document may cause a paper misfeed or damage to the document or machine. Note In order to copy double-sided documents, the Duplexing Document Feeder AFR-19 (for Di2011) must be installed. Document Types Single-sided documents Double-sided documents Documents of mixed sizes Di1611/Di2011 5-25...
Page 106: Documents Of Uniform Sizes
— — — — 210 mm A4 L — — A5 C — — 182 mm B5 L — — — 148 mm A5 L — — — — — — 2: Copying possible —: Copying not possible 5-26 Di1611/Di2011...
Page 107: Precautions Concerning The Documents
Glass, the Auto Paper and the Auto Size functions are not available. After loading a document of a non-standard size, press the [Paper] key to select a paper size or press the [Zoom] key to select a zoom ratio. Di1611/Di2011 5-27...
Page 108: Specifying A Zoom Setting
Copies can be made using different scaling proportions for the vertical and horizontal directions. Using the keys, the zoom ratio can be adjusted (increased or reduced) in 0.01 increments. The vertical and horizontal zoom ratios can be set between × 0.50 and × 1.00. 5-28 Di1611/Di2011...
Page 109: To Make Copies Using The "Auto" Zoom Setting
Press the [Paper] key, and then select the desired paper size. If necessary, specify any other copy settings. Copy density (p. 5-34) Advanced Copy Operations (p. 6-1) Using the 10-Key Pad, enter the desired number of copies, and then press the [Start] key. Di1611/Di2011 5-29...
Page 110: To Make Copies Using A Fixed Zoom Setting
× 1.00 ... If necessary, specify any other copy settings. Paper (p. 5-21) Copy density (p. 5-34) Advanced Copy Operations (p. 6-1) Using the 10-Key Pad, enter the desired number of copies, and then press the [Start] key. 5-30 Di1611/Di2011...
Page 111: To Make Copies Using A Specific Zoom Setting
The zoom ratio is set in 0.01 increments. If necessary, specify any other copy settings. Paper (p. 5-21) Copy density (p. 5-34) Advanced Copy Operations (p. 6-1) Using the 10-Key Pad, enter the desired number of copies, and then press the [Start] key. Di1611/Di2011 5-31...
Page 112: To Make Copies Using The "X/Y Zoom" Function
× 0.50 A × 0.70 A × 0.81 A × 1.00 A × 0.50 ... Width (Y) Length Press the [No] key to return to the main screen. To correct the specified zoom ratio, press the [No] key, and then perform the operation again from step 2. 5-32 Di1611/Di2011...
Page 113 2. If necessary, specify any other copy settings. Paper (p. 5-21) Copy density (p. 5-34) Advanced Copy Operations (p. 6-1) Using the 10-Key Pad, enter the desired number of copies, and then press the [Start] key. Di1611/Di2011 5-33...
Page 114: Specifying The Copy Density ("Auto/Photo" Function)
Selecting a density level that is too dark may cause the media color of the document to be reproduced, and selecting a level that is too light may produce a very faint copy. Therefore, select the appropriate level depending on the document. 5-34 Di1611/Di2011...
Page 115: To Make Copies After Specifying A Copy Density
When making copies with a Zoom (p. 5-28) light density level Advanced Copy Operations (p. 6-1) Using the 10-Key Pad, enter the When making copies with a darker density level desired number of copies, and then press the [Start] key. Di1611/Di2011 5-35...
Page 116: Interrupting Copy Jobs
If necessary, specify any other copy settings. Paper (p. 5-21) Zoom (p. 5-28) Copy density (p. 5-34) Advanced Copy Operations (p. 6-1) Using the 10-Key Pad, enter the desired number of copies, and then press the [Start] key to copy the other document. 5-36 Di1611/Di2011...
Page 117 After the other document is copied, press the [Interrupt] key. The Interrupt indicator goes off, and all copy functions return to their previous settings. Reload the document that was removed in step 2. Press the [Start] key. The interrupted copy job continues. Di1611/Di2011 5-37...
Page 118 Before Making Copies 5-38 Di1611/Di2011...
Page 119: Advanced Copy Operations
2in1Copy Documents 4in1Copy Note The optional Document Feeder must be installed. Load the document to be copied into the Document Feeder. Refer to “Loading the Document” on page 3-8. Press the [Copy] key. The “2in1” (or “4in1”) indicator lights Di1611/Di2011...
Page 120 The copy order can be set to one of the two shown at the right. For details on changing PATTERN1 PATTERN2 the copy order, refer to “To set the “4IN1 COPY ORDER” function” on page 7-49. The manufacturer’s default setting is “PATTERN1”. Di1611/Di2011...
Page 121: To Make Copies Using The "Book Separation" Function
The width of the erased area for the “FRAME” setting can be changed using the “ERASE SETTING” function in the Utility mode (“To specify the erased width (“ERASE SETTING” function)” on page 7-43). Press the [Yes] key. The main screen appears. Di1611/Di2011...
Page 122 Copies Documents “CENTER” Erase setting The pages are copied with a blank area along the binding. Documents Copies “BOTH” Erase setting The pages are copied with blank areas framing the text Documents Copies and along the binding. Di1611/Di2011...
Page 123: Double-Sided Copies
The optional Duplex Unit must be installed. (Di2011 only) The type of double-sided copy that can be made depends on the options that are installed. When making 2in1 and 4in1 copies, use the Document Feeder. When copying double-sided documents, use the Duplexing Document Feeder. Di1611/Di2011...
Page 124 Single-sided documents A Double-sided copy Double-sided document A × Double-sided copy Single-sided documents A × 2in1 double-sided copy Single-sided documents A × 4in1 double-sided copy Double-sided documents A × × 2in1 double-sided copy Double-sided documents A × × 4in1 double-sided copy Di1611/Di2011...
Page 125: Double-Sided Copying Is Not Possible Under The Following Conditions
[Start] key. After the document page is scanned, the message “NEXT PAGE SCAN=START” appears. Position the second document page, and then press the [Start] key. After the document page is scanned, a double-sided copy is printed. Di1611/Di2011...
Page 126: To Make Double-Sided Copies Using The Document Feeder
The desired double-sided copy function is selected. If necessary, specify any other copy setting. Before Making Copies (p. 5-1) Advanced Copy Operations (p. 6-1) Using the 10-Key Pad, enter the desired number of copies, and then press the [Start] key. Di1611/Di2011...
Page 127: Finishing Copies ("Sort" And "Group" Functions)
Finishing functions Non-sort function: Copies Documents The copies are stacked on top of each other as they are fed out. “Sort” function: Copies Documents The copies are automatically divided into sets with each set containing a copy of each page. Di1611/Di2011...
Page 128: Notes On Using The "Sort" And "Group" Functions
The Auto Paper function is selected. The “Mixed Orig.” function must not be selected. The Document Feeder is installed. The “CRISSCROSS MODE” function in the Utility mode is set to “ON”. (p. 7-50) The optional Shifting Unit is not installed. 6-10 Di1611/Di2011...
Page 129: Shift Sorting
Each copy set is fed out in an alternating crisscross pattern. Shift Grouping Each page set is fed out shifted to alternating sides. Note The optional Shifting Unit must be installed. Crisscross Grouping Each page set is fed out in an alternating crisscross pattern. Di1611/Di2011 6-11...
Page 130: Specifying Finishing
The “Non-sort” function is selected. If necessary, specify any other copy settings. Before Making Copies (p. 5-1) Advanced Copy Operations (p. 6-1) Using the 10-Key Pad, enter the desired number of copies, and then press the [Start] key. 6-12 Di1611/Di2011...
Page 131: Erasing Sections Of Copies
Areas such as the unclean-looking frames around copies can be erased. Precautions on the Erased Margin Location The location of the erased area in the copy depends on how the document is positioned. Erase Original Glass Document Feeder setting LEFT UPPER FRAME Di1611/Di2011 6-13...
Page 132: To Make Copies Using An Erase Setting
Press the [Yes] key. The main screen appears. If necessary, specify any other copy settings. Before Making Copies (p. 5-1) Advanced Copy Operations (p. 6-1) Using the 10-Key Pad, enter the desired number of copies, and then press the [Start] key. 6-14 Di1611/Di2011...
Page 133: Negative/Positive Inverted Copying
The “Neg. Pos.” indicator lights If necessary, specify any other copy settings. Before Making Copies (p. 5-1) Advanced Copy Operations (p. 6-1) Using the 10-Key Pad, enter the desired number of copies, and then press the [Start] key. Di1611/Di2011 6-15...
Page 134: Making Copies For Filing ("File Margin" Function)
Documents Copies Precautions on the Binding Margin Location The location of the binding margin area in the copy depends on how the document is positioned. Original Glass Document Feeder 6-16 Di1611/Di2011...
Page 135: To Make Copies Using The "File Margin" Function
“BINDING POS.” function” on page 7-41). If necessary, specify any other copy settings. Before Making Copies (p. 5-1) Advanced Copy Operations (p. 6-1) Using the 10-Key Pad, enter the desired number of copies, and then press the [Start] key. Di1611/Di2011 6-17...
Page 136: Programmed Copy Jobs
[Yes] key. Note If two copy programs have already been stored, the copy settings previously stored under the selected program number are deleted and replaced with the new ones. 6-18 Di1611/Di2011...
Page 137: To Recall A Copy Program
Press the [Copy Program] key. Using the keys, select “RECALL”, and then press the [Yes] key. Using the keys, select the program number of the copy program that you wish to recall, and then press the [Yes] key. Press the [Start] key. Di1611/Di2011 6-19...
Page 138: Access Numbers
Position the document(s) to be copied, and then select the desired copy settings. Before Making Copies (p. 5-1) Advanced Copy Operations (p. 6-1) Press the [Start] key. When you are finished making copies, press the [Access] key. 6-20 Di1611/Di2011...
Page 139: Utility Mode - Copy Functions
(For each paper tray) INCH/METRIC TRAY1 PAPER PLAIN/OHP/CARD/ENVELOPE AUTO/CUSTOM PAPER TYPE PLAIN/RECYCLE/SPECIAL/ 1-SIDE* 3 USER MANAGEMENT DRUM DEHUMIDIFY — TONER REPLENISHER — 4 ADMIN. AUTO SHUT OFF DISABLE/ENABLE MANAGEMENT COPY TRACK COPY TRACK MODE (ON/OFF) ACCESS NO. REG. COPY TRACK DATA (DISPLAY/CLEAR) Di1611/Di2011...
Page 140: Duplex Unit
6 COPY SETTING 2 MIXED ORIGINAL ON/OFF COPY PRIORITY AP/AS/MANUAL OUTPUT PRIORITY NON/SORT/GROUP 4IN1 COPY ORDER PATTERN1/PATTERN2 CRISSCROSS MODE ON/OFF DUPLEX COPY ON/OFF “1-SIDE” is displayed only when the machine is equipped with the duplex unit. Only with Di2011 Di1611/Di2011...
Page 141: Specifying Machine Settings ("Machine Setting" Menu)
LCD CONTRAST This function can be used to adjust the contrast of the Control Panel display. • The manufacturer’s default setting is LANGUAGE This function can be used to set the language of the display and the printed reports. Di1611/Di2011...
Page 142: To Select The "Machine Setting" Menu
5 DENSITY (BOOK) 6 PRINT DENSITY 7 LCD CONTRAST 8 LANGUAGE If, at any time, you wish to quit setting a “MACHINE SETTING” function, press the [No] key. When the message “STOP SETTING?” appears, press the [Yes] key to quit. Di1611/Di2011...
Page 143: To Set The "Auto Panel Reset" Function
“ON” or “OFF”, and then press the [Yes] key. If “OFF” was selected, the “MACHINE SETTING” menu appears again. Using the keys, select “0.5”, “1”, “2”, “3”, “4” or “5”, and then press the [Yes] key. The “MACHINE SETTING” menu appears again. Di1611/Di2011...
Page 144: To Set The "Energy Save Mode" (Preheat Mode) Function
[Yes] key. The timer can be set between 1 min and 240 min. If you wish to correct the setting, press the [No] key, and then enter the new number. The “MACHINE SETTING” menu appears again. Di1611/Di2011...
Page 145: To Set The "Auto Shut Off" Function
If the Auto Shut Off function is performed and the machine is turned off, it will no longer be possible to make copies or print from a computer. To make copies or print from a computer, turn on the machine. Di1611/Di2011...
Page 146: To Specify The Scanning Image Quality ("Density(Adf)" Function)
Press the [4] key from the 10-Key Pad to select “DENSITY(ADF)”. Note If the Document Feeder is not installed, “NOT AVAILABLE” appears. Using the keys, select either “MODE1” or “MODE2”, and then press the [Yes] key. The “MACHINE SETTING” menu appears again. Di1611/Di2011...
Page 147: To Specify The Scanning Image Quality ("Density(Book)" Function)
Refer to “To select the “MACHINE SETTING” menu” on page 7-4. Press the [5] key from the 10-Key Pad to select “DENSITY(BOOK)”. Using the keys, select either “MODE1” or “MODE2”, and then press the [Yes] key. The “MACHINE SETTING” menu appears again. Di1611/Di2011...
Page 148: To Specify The Printing Density ("Print Density" Function)
7-4. Press the [6] key from the 10-Key Pad to select “PRINT DENSITY”. Using the keys, select one of the five settings between “LIGHT” and “DARK”, and then press the [Yes] key. The “MACHINE SETTING” menu appears again. 7-10 Di1611/Di2011...
Page 149: To Set The "Lcd Contrast" Function
7-4. Press the [7] key from the 10-Key Pad to select “LCD CONTRAST”. Using the keys, select one of the four settings between “LIGHT” and “DARK”, and then press the [Yes] key. The “MACHINE SETTING” menu appears again. Di1611/Di2011 7-11...
Page 150: To Set The "Language" Function
Refer to “To select the “MACHINE SETTING” menu” on page 7-4. Press the [8] key from the 10-Key Pad to select “LANGUAGE”. Using the keys, select the desired language, and then press the [Yes] key. The “MACHINE SETTING” menu appears again. 7-12 Di1611/Di2011...
Page 151: Setting Up The Paper Sources ("Paper Source Setup" Menu)
“1-SIDE”:The Auto Paper function can be selected and the auto tray switching feature is available only when making single-sided copies. In addition, double-sided copies can be made. • The manufacturer’s default setting is “PLAIN”. Di1611/Di2011 7-13...
Page 152: To Select The "Paper Source Setup" Menu
1 INCH/METRIC 2 TRAY1 PAPER 3 PAPER TYPE If, at any time, you wish to quit setting a “PAPER SOURCE SETUP” function, press the [No] key. When the message “STOP SETTING?” appears, press the [Yes] key to quit. 7-14 Di1611/Di2011...
Page 153: To Specify The Automatic Paper Size Detection Units ("Inch/Metric" Function)
Pad to select “INCH/METRIC”. Using the keys, select a paper tray, and then press the [Yes] key. Using the keys, select either “METRIC” or “INCH”, and then press the [Yes] key. The “PAPER SOURCE SETUP” menu appears again. Di1611/Di2011 7-15...
Page 154: To Specify The Size Of Paper Loaded Into The 1St Tray ("Tray1 Paper" Function)
(mm), and then press the [Yes] key. The paper length can be set between 140 mm and 432 mm. If you wish to correct the setting, press the [No] key, and then enter the new number. 7-16 Di1611/Di2011...
Page 155 The paper width can be set between 90 mm and 297 mm. If you wish to correct the setting, press the [No] key, and then enter the new number. Press the [Yes] key. The “PAPER SOURCE SETUP” menu appears again. Di1611/Di2011 7-17...
Page 156: To Set The "Paper Type" Function
“PLAIN”, “RECYCLE” or “SPECIAL”, “1-SIDE” and then press the [Yes] key. The “PAPER SOURCE SETUP” menu appears again. Note “1-SIDE” is displayed only when the machine is equipped with the Duplex Unit (option for the Di2011 only). 7-18 Di1611/Di2011...
Page 157: Specifying User-Managed Service Tasks ("User Management" Menu)
To perform the “DRUM DEHUMIDIFY” function Press the [Utility] key. “MACHINE SETTING?” appears. Press the key twice to select “USER MANAGEMENT?”, and then press the [Yes] key. Di1611/Di2011 7-19...
Page 158 Utility Mode – Copy Functions Using the keys, select “DRUM DEHUMIDIFY?”, and then press the [Yes] key. Drum drying begins, and the main screen appears. 7-20 Di1611/Di2011...
Page 159: To Perform The "Toner Replenisher" Function
Toner replenishing begins, and the main screen appears. Note While the toner is being replenished, do not turn off the machine or open the Front Cover. If the density of the toner is suitable, do not perform the toner replenishing operation. Di1611/Di2011 7-21...
Page 160: Specifying Administrative Settings ("Admin. Management" Menu)
Note The registering and setup of the administrator access number should be performed by the service representative. For details, contact the service representative. The administrator of this machine should be sure not to lose the administrator access number. 7-22 Di1611/Di2011...
Page 161: To Select The "Admin. Management" Menu
[Yes] key. If, at any time, you wish to quit setting an “ADMIN. MANAGEMENT” function, press the [No] key. When the message “STOP SETTING?” appears, press the [Yes] key to quit. Di1611/Di2011 7-23...
Page 162: To Set The "Auto Shut Off" Function
Refer to “To select the “MACHINE SETTING” menu” on page 7-4. Press the [3] key from the 10-Key Pad to select “AUTO SHUT OFF”. Using the keys, select “OFF”, and then press the [Yes] key. The “MACHINE SETTING” menu appears again. 7-24 Di1611/Di2011...
Page 163 “DISABLE”, it will no longer be possible to make copies or print from a computer after the Auto Shut Off function is performed and the machine is turned off. To make copies or print from a computer, turn on the machine. Di1611/Di2011 7-25...
Page 164: To Turn On/Off User (Section) Management
The “COPY TRACK” appears. Using the keys, select “COPY TRACK MODE?”, and then press the [Yes] key. Using the keys, select either “ON” or “OFF”, and then press the [Yes] key. The “COPY TRACK MODE” function appears again. 7-26 Di1611/Di2011...
Page 165: To Register User (Section) Access Numbers
Once the access number is registered, a screen appears, allowing you to enter the next access number to be registered. When you are finished registering access numbers, press the [No] key. The “ACCESS NO. REG” function appears again. Di1611/Di2011 7-27...
Page 166 Utility Mode – Copy Functions Note If you try to register more than 20 access numbers, the message “UP TO 20 SECTIONS” appears. 7-28 Di1611/Di2011...
Page 167: To Change/Delete User (Section) Access Numbers
[No] key, and then enter the new number. A confirmation message appears, asking whether or not to keep the registered access number. To change/delete the access number, press the [No] key. To keep the currently registered access number, press the [Yes] key. Di1611/Di2011 7-29...
Page 168 If the new access number has already been registered, the message “ACCESS NO. IS USE” appears. Press the [No] key, and then enter a different access number. When you are finished changing/ deleting access numbers, press the [No] key. The “ACCESS NO. REG” function appears again. 7-30 Di1611/Di2011...
Page 169: To Display/Clear The Total Count For A Specific Account
10-Key Pad. When clearing the counter for a specific account (section), the access (section) number for that account should be selected. The total count for the selected account (section) is displayed. Di1611/Di2011 7-31...
Page 170 The “COPY TRACK DATA” function appears again. After the counter is cleared, press the [Yes] key. After clearing the counter, if you wish to reset the counter to the previous count, press the [Interrupt] key. The “COPY TRACK DATA” function appears again. 7-32 Di1611/Di2011...
Page 171: To Clear The Total Counts For All Accounts
“CLEAR”, and then press the [Yes] key. A confirmation message appears, asking whether or not to clear all counters. Press the [Yes] key. After the message “SECTION COUNTER CLEARED” appears, the “COPY TRACK DATA” function appears again. Di1611/Di2011 7-33...
Page 172: Specifying Copy Settings
“UPPER” and “FRAME” Erase settings is 10 mm. SMALL ORIGINAL This function is used to specify whether or not copying is possible after loading a small document whose size cannot be automatically detected. • The manufacturer’s default setting is “ENABLE”. “COPY SETTING 2” menu: 7-34 Di1611/Di2011...
Page 173 • The manufacturer’s default setting is “ON”. DUPLEX COPY This function is used to select whether or not double- sided printing is used. The optional Duplex Unit must be installed. (Option only for the Di2011) • The manufacturer’s default setting is “OFF”. Di1611/Di2011 7-35...
Page 174: To Select The "Copy Setting 1" Menu
6 MARGIN SETTING 7 ERASE SETTING 8 SMALL ORIGINAL If, at any time, you wish to quit setting a “COPY SETTING 1” function, press the [No] key. When the message “STOP SETTING?” appears, press the [Yes] key to quit. 7-36 Di1611/Di2011...
Page 175: To Set The "Paper Priority" Function
“PAPER PRIORITY” function, and if the paper in all of these paper drawers are used, a message may appear indicating that paper be loaded into a paper drawer that was not given priority. In this case, load paper according to the message that appears. Di1611/Di2011 7-37...
Page 176: To Set The "Density Priority" Function
If “TEXT” or “TEXT/P” is selected, a screen appears, allowing you to select either “AUTO” or “MANUAL”. Using the keys, select either “AUTO” or “MANUAL”, and then press the [Yes] key. The “COPY SETTING 1” menu appears again. 7-38 Di1611/Di2011...
Page 177: To Set The "Auto" Density Level ("Density Level(A)" Function)
Press the [3] key from the 10-Key Pad to select “DENSITY LEVEL(A)”. Using the keys, select one of the three settings between “LIGHT” and “DARK”, and then press the [Yes] key. The “COPY SETTING 1” menu appears again. Di1611/Di2011 7-39...
Page 178: To Set The Manual Density Level ("Density Level(M)" Function)
Press the [4] key from the 10-Key Pad to select “DENSITY LEVEL(M)”. Using the keys, select one of the nine settings between “LIGHT” and “DARK”, and then press the [Yes] key. The “COPY SETTING 1” menu appears again. 7-40 Di1611/Di2011...
Page 179: To Set The "Binding Pos." Function
SETTING 1” menu” on page 7-36. Press the [5] key from the 10-Key Pad to select “BINDING POS.”. Using the keys, select either “LEFT” or “RIGHT”, and then press the [Yes] key. The “COPY SETTING 1” menu appears again. Di1611/Di2011 7-41...
Page 180: To Specify The Binding Width ("Margin Setting" Function)
[Yes] key. The binding width can be set between 0 mm and 20 mm. If you wish to correct the setting, press the [No] key, and then enter the new number. The “COPY SETTING 1” menu appears again. 7-42 Di1611/Di2011...
Page 181: To Specify The Erased Width ("Erase Setting" Function)
The width of the area to be erased can be set between 5 mm and 20 mm. If you wish to correct the setting, press the [No] key, and then enter the new number. The “COPY SETTING 1” menu appears again. Di1611/Di2011 7-43...
Page 182: To Set The "Small Original" Function
“DISABLE” or “ENABLE”, and then press the [Yes] key. If a document that cannot be detected is loaded and “ENABLE” is selected, the paper given priority is used for copying. The “COPY SETTING 1” menu appears again. 7-44 Di1611/Di2011...
Page 183: To Select The "Copy Setting 2" Menu
4 4IN1 COPY ORDER 5 CRISSCROSS MODE 6 DUPLEX COPY If, at any time, you wish to quit setting a “COPY SETTING 2” function, press the [No] key. When the message “STOP SETTING?” appears, press the [Yes] key to quit. Di1611/Di2011 7-45...
Page 184: To Set The "Mixed Original" Function
SETTING 2” menu” on page 7-45. Press the [1] key from the 10-Key Pad to select “MIXED ORIGINAL”. Using the keys, select either “ON” or “OFF”, and then press the [Yes] key. The “COPY SETTING 2” menu appears again. 7-46 Di1611/Di2011...
Page 185: To Set The "Copy Priority" Function
Press the [2] key from the 10-Key Pad to select “COPY PRIORITY”. Using the keys, select “AP” (auto paper selection), “AS” (auto zoom ratio) or “MANUAL”, and then press the [Yes] key. The “COPY SETTING 2” menu appears again. Di1611/Di2011 7-47...
Page 186: To Specify The Default Finishing Mode ("Output Priority" Function)
SETTING 2” menu” on page 7-45. Press the [3] key from the 10-Key Pad to select “OUTPUT PRIORITY”. Using the keys, select “NON”, “SORT” or “GROUP”, and then press the [Yes] key. The “COPY SETTING 2” menu appears again. 7-48 Di1611/Di2011...
Page 187: To Set The "4In1 Copy Order" Function
SETTING 2” menu” on page 7-45. Press the [4] key from the 10-Key Pad to select “4IN1 COPY ORDER”. Using the keys, select either “PATTERN1” or “PATTERN2”, and then press the [Yes] key. The “COPY SETTING 2” menu appears again. Di1611/Di2011 7-49...
Page 188: To Set The "Crisscross Mode" Function
SETTING 2” menu” on page 7-45. Press the [5] key from the 10-Key Pad to select “CRISSCROSS MODE”. Using the keys, select either “ON” or “OFF”, and then press the [Yes] key. The “COPY SETTING 2” menu appears again. 7-50 Di1611/Di2011...
Page 189: To Set The "Duplex Copy" Function
SETTING 2” menu” on page 7-45. Press the [6] key from the 10-Key Pad to select “DUPLEX COPY”. Using the keys, select either “ON” or “OFF”, and then press the [Yes] key. The “COPY SETTING 2” menu appears again. Di1611/Di2011 7-51...
Page 190 Utility Mode – Copy Functions 7-52 Di1611/Di2011...
Page 191: Error Messages
For details, contact your service representative. In order to prevent the used toner cartridge from dirtying anything, keep it in the box. Dispose of the used toner cartridge according to your local regulations. Di1611/Di2011...
Page 192: To Replace The Toner Bottle
Toner Bottle Holder. Have the necessary precautions been observed while inserting the toner bottle? As shown at the right, the tab on the toner bottle should securely fit into the notch in the Toner Bottle Holder. Di1611/Di2011...
Page 193 When the Front Cover is closed, the toner automatically begins refilling. Are copies faint immediately after the toner bottle is replaced? Perform the “TONER REPLENISHER” function in the Utility mode (“To perform the “TONER REPLENISHER” function” on page 7-21). Di1611/Di2011...
Page 194: When The Message "Paper Jam" Appears
Follow the appropriate procedure described below to clear the misfed paper. To clear a paper misfeed in the Duplex Unit Note The optional Duplex Unit must be installed. (Di2011 only) Open the Duplex Unit door. Carefully pull out any misfeed paper. Close the Duplex Unit door. Di1611/Di2011...
Page 195: To Clear A Paper Misfeed In The Main Unit Or 1St Tray
CAUTION Decreased copy quality may result if the surface of the PC drum is touched. Be careful not to touch the surface of the PC drum. PC drum Di1611/Di2011...
Page 196 While turning the knob on the roller, slowly pull out the paper. Have the necessary precautions been observed when turning the roller? Only turn the green knob when turning the roller. Be careful not to touch the surface of the PC drum. Di1611/Di2011...
Page 197 Slide the paper guides against the edges of the paper. Is the paper guide positioned correctly? Make sure that the paper guides are pushed up against the edges of the paper. Close the 1st Tray. Di1611/Di2011...
Page 198: To Clear A Paper Misfeed In The Paper Feed Unit
Error Messages To clear a paper misfeed in the Paper Feed Unit Open the Side Cover of the Paper Feed Unit. Slowly pull out the paper. Close the Side Cover of the Paper Feed Unit. Di1611/Di2011...
Page 199: To Clear A Paper Misfeed In The Multiple Bypass
Decreased copy quality may result if the surface of the image transfer roller is touched. Be careful not to touch the surface of the image transfer roller. Image transfer roller Remove all paper from the Multiple Bypass. Open the Side Cover of the main unit. Di1611/Di2011...
Page 200 Error Messages Slowly pull out the paper. Close the Side Cover of the main unit. Load the paper into the Multiple Bypass again. 8-10 Di1611/Di2011...
Page 201: When The Message "Original Doc.jam" Appears
Remove the misfed document according to the following procedure. To clear a misfeed in the Automatic Document Feeder (AF-12) Open the Document Feeder Cover. Remove all document pages from the Document Feeder Tray. Lift open the Automatic Document Feeder. Di1611/Di2011 8-11...
Page 202 Load the documents removed in step 2 back into the tray. Note If “RETURN 1 (2) ORIG. to ADF and PRESS START KEY” appears on the display, also load the one or two document pages that caused the paper misfeed. 8-12 Di1611/Di2011...
Page 203: To Clear A Misfeed In The Duplexing Document Feeder (Afr-19)
To clear a misfeed in the Duplexing Document Feeder (AFR-19) Pull up the lever for the Document Feeder Cover to open the cover. Carefully pull out any misfed documents. Swing up the Document Guide Lever. Turn the Document Feed Knob to feed out any misfed documents. Di1611/Di2011 8-13...
Page 204 Error Messages While supporting the Document Feed Tray with your right hand, carefully pull out any misfed documents. Return the Document Guide Lever to its original position, and then close the Document Feeder Cover. 8-14 Di1611/Di2011...
Page 205: Main Error Messages And Their Remedies
Securely close the Document OPEN up (while a document is Feeder. loaded into it). (Flashing alternately) CLOSE DOCUMENT COVER DOC.FEED COVER The Document Feeder Cover Securely close the Document OPEN is open. Feeder Cover. (Flashing alternately) CLOSE DOC.FEED COVER Di1611/Di2011 8-15...
Page 206 Either load paper of a suitable Size function, the combination size, or use the of the document and paper keys to specify the zoom ratio. sizes caused the zoom ratio to exceed the range between ×0.5 and ×2.0. 8-16 Di1611/Di2011...
Page 207 The Imaging Unit should be Contact your service replaced. representative. MACHINE TROUBLE Some problem occurred in the Turn the machine off, then on machine. again. (Flashing If the error is still displayed, alternately) contact your service representative. (C####) Di1611/Di2011 8-17...
Page 208 Error Messages 8-18 Di1611/Di2011...
Page 209: Troubleshooting
Use the Auto/ Photo key to select a lighter density for the background. (p. 5-34) The Imaging Unit has Contact your service reached the end of its representative. service life. Di1611/Di2011...
Page 210 The Document Guide Slide the Document Guide Plates are not slid up Plates against the edges of against the edges of the the document. document. Curled paper was loaded Flatten the paper before into the paper tray. loading it. Di1611/Di2011...
Page 211: When Copying Is Not Performed Correctly
The machine cannot be turned The power supply cord has Plug the power supply cord been unplugged from the into the electrical outlet. electrical outlet. The breaker for the Close the breaker for the electrical circuit has been electrical circuit. tripped. Di1611/Di2011...
Page 212 Troubleshooting Di1611/Di2011...
Page 213: Appendix
Appendix Appendix 10.1 Specifications Main Unit Di1611/Di2011 Specification Di1611 Di2011 Type Desktop/Console* Platen Stationary Photo conductor Copying system Electro photographic printing system Developing system MTHG system Fusing system Heat-roller-fixing system Resolution 600 dpi × 600 dpi Document Types: Sheets, books, and other three-dimensional objects Size: Maximum A3 L, Ledger L (11 ×...
Page 214: Duplexing Document Feeder Afr-19
Leading edge: 4 mm, Trailing edge: 4 mm, Rear edge: 4 mm, Front edge: 4 mm Power requirements AC 220 to 240 V, 4.5 A (Di1611), 5.5 A (Di2011), 50/60 Hz Power consumption 230 V: 1050 W (Di1611), 1250 W (Di2011) Size 599 mm (width) ×...
Page 215: Mixed Width Document Sizes (Afr-19)
B5 C, or A4 L and A5 C Document loading capacity Maximum 50 sheets (80 g/m Power consumption Less than 36 W Size 598 mm (width) × 483 mm (depth) × 102 mm (height) Weight Less than 6.3 kg Di1611/Di2011 10-3...
Page 216: Paper Feed Unit Pf-126
A4 size (stacked up to 22 mm high) Special paper: 10 sheets Lower Copy Tray: Plain or recycled paper: 150 A4-size sheets, 75 sheets of other than A4 size Special paper: 20 sheets Power consumption Less than 24 W 10-4 Di1611/Di2011...
Page 217: Multiple Bypass Mb-6
Plain or recycled paper: 100 sheets Special paper (cards, OHP transparencies, postcards, label sheets): 20 sheets Envelopes: 10 envelopes Power consumption Less than 9 W Size (Maximum) 439 mm (width) × 435 mm (depth) × 137 mm (height) Weight 3.0 kg Di1611/Di2011 10-5...
Page 218: Care Of The Machine
Original Glass Clean the Original Glass by wiping it with a soft, dry cloth. Document Pad Clean the surface of the document pad by wiping it with a soft cloth dampened with alcohol. 10-6 Di1611/Di2011...
Page 219: Control Panel
Appendix Control Panel Clean the Control Panel by wiping it with a soft, dry cloth. CAUTION Incorrectly cleaning the Control Panel keys may damage them. Never use mild household detergent or glass cleaner to clean the Control Panel. Di1611/Di2011 10-7...
Page 220: Function Combination Table
Appendix 10.3 Function Combination Table Function Combination Table for Di1611 10-8 Di1611/Di2011...
Page 221: Function Combination Table For Di2011
Appendix Function Combination Table for Di2011 Di1611/Di2011 10-9...
Page 222: Function Combination Codes
Book Separation can be combined with Sort/Group. However, regardless of the selected Finishing setting, the final output is the same. Book Separation + Duplex can be combined with Sort/Group. However, regardless of the selected Finishing setting, the final output is the same. 10-10 Di1611/Di2011...
Page 223: Paper Size And Zoom Ratio Tables
Letter 8-1/2 × 11 216 mm × 279 mm Government Letter 8 × 10-1/2 203 mm × 267 mm Quarto 8 × 10 203 mm × 254 mm Statement Invoice 5-1/2 × 8-1/2 140 mm × 216 mm Di1611/Di2011 10-11...
Page 224: Zoom Ratios
× 0.81 257 mm × 364 mm × 0.57 10 × 14-1/4 × 0.70 × 0.50 × 1.15 × 0.81 182 mm × 257 mm × 0.57 7-1/4 × 10 × 0.70 × 1.63 × 1.15 × 1.41 10-12 Di1611/Di2011...
Page 225 Appendix Metric sizes Document size Paper size Zoom ratio × 0.81 128 mm × 182 mm × 1.64 5 × 7-1/4 × 1.15 × 2.00 × 1.41 Di1611/Di2011 10-13...
Page 226 × 2.00 5-1/2 × 8-1/2 11 × 14 × 1.64 139.7 mm × 215.9 mm Legal × 1.54 Foolscap × 1.50 Letter × 1.29 Zoom ratio=Paper size/Document size 1 inch = 25.4 mm 1 mm = 0.0394 inch 10-14 Di1611/Di2011...
Page 227: Index
Control panel ..................2-16 Energy save key ................2-22 Interrupt key .................5-36 Copy density ..................5-34 Setting ..................5-35 Copy functions 4in1 copy order ................7-49 Binding position ................7-41 Binding width ................7-42 Copy priority .................7-47 Crisscross mode ................7-50 Default density level (Auto) ............7-39 Di1611/Di2011 11-1...
Page 228 Erase function ................... 6-13 Error messages ................. 8-15 Finishing copies .................. 6-9 Grouping ..................6-11 Sorting ..................6-11 Function combination table ............... 10-8 Incorrect copies ................... 9-1 Installation site ..................2-1 Interrupting copy jobs ................ 5-36 Job separator ..................10-4 11-2 Di1611/Di2011...
Page 229 Manual paper selection ..............5-22 Menu commands .................7-1 Multiple bypass ..................10-5 Negative/positive inverted copying ............6-15 Operation precautions .................2-3 Options Document feeder .................2-12 Job separator ................2-15 Multiple bypass ................2-13 Paper feed unit ................2-14 Paper feed unit ..................10-4 Paper feeding ..................1-3 Di1611/Di2011 11-3...
Page 230 Specifications ..................10-1 Toner replenishing ..............7-21 TOTAL COUNT ................. 3-15 Turning on/off ..................2-21 User management Administrative settings ..............7-26 User-managed service tasks ............7-19 Utility mode ..................7-1 Copy setting 1 ................7-36 Copy setting 2 ................7-45 11-4 Di1611/Di2011...
Page 231 Index Zoom setting ..................5-28 Auto zoom ratio ................5-29 X/Y zoom function ................5-32 Di1611/Di2011 11-5...
Page 232 Index 11-6 Di1611/Di2011...

This manual is also suitable for:

Di2011

Konica Minolta Di1611 Advanced Information

1 Introduction

2 Precautions

3 Basic Operations

4 Useful Operations

5 Before Making Copies

6 Advanced Copy Operations

7 Utility Mode - Copy Functions

8 Error Messages

9 Troubleshooting

10 Appendix

11 Index

Quick Links

Need help?

Questions and answers

Related Manuals for Konica Minolta Di1611

Summary of Contents for Konica Minolta Di1611