How To Access The Key Operator Mode - Konica Minolta Di5510 User Manual

Key Operator Mode
To the Key Operator (continued)

How to Access the Key Operator Mode

1 Press the [Help] button on the Control panel to display the Help Screen.
2 Touch the Key Operator Mode on the Help Screen.
The Key Operator Password Entry Screen displays when the 4-digit Key Operator
password is set by your service representative.
Otherwise, the Key Operator Mode Screen displays without the password requirement.
3 If the Key Operator Password Entry Screen is displayed, use the keypad on the touch
screen to enter your 4-digit key operator password. Touch OK to display the Key
Operator Mode Screen. (See note.)
If the Key Operator password is not valid, check with your service representative.
4 To display menus [11] to [23] of the Key Operator Mode Screen, touch the lower arrow
key.
To return the previous screen, touch the upper arrow key.
5 Make setting changes from the Key Operator Mode Screen, as described on the
following pages.
NOTE: If an invalid password is entered, enter the valid 4-digit password.
13-3