Basic Operations
Store Mode (continued)
EDH Store Mode
Use this feature to scan more than 100 originals into memory from the EDH. Use this
function in conjunction with the Reserve function to increase efficiency of the copying job.
❒ Incompatible Basic Copying Conditions: None
❒ Incompatible Special Originals: None
❒ Incompatible Applications: Image insert, Book copy, Storing image in Overlay Memory
Basic Screen
1 Touch STORE on the Basic Screen to highlight it.
2 Make the desired copying selections.
3 Position originals FACE UP on EDH.
If the number of originals exceeds 100, divide them into blocks not exceeding 100
sheets and load them in sequential order.
4 Enter the print quantity, using the keypad. The entered quantity will be displayed on the
upper right message area of the Basic Screen.
To change the print quantity, press [ C ] (clear) and re-enter the correct quantity.
5 Press [ Start ] to scan the originals.
6 Repeat steps 3 and 5 until all originals are scanned.
To delete the scanned data without printing, press [ Stop ], then touch CANCEL on the
popup menu to ensure that you delete the data.
7 Touch STORE to exit the Store mode.
8 Press [ Start ]. The copier starts the printing job.
6-37