Konica Minolta Di5510 User Manual page 251

Network Function
Image Store/Delete Mode (continued)
To Store Image Data in HDD (continued)
Image Data Store/Delete Site Selection Screen
Job Name Entry Screen
1 Press [Mode] to light up the [Scan] LED. The Scan/Server Setting Menu Screen will
display.
2 Touch IMAGE STORE/DELETE to display the Image Data Store/Delete Site Selection
Screen.
3 Enter the desired image data password in up to 8 characters from the touch screen
keypad.
To correct an entry, touch 1-CHARACTER DELETE repeatedly to delete each character,
then enter the correct password.
4 If the password is correct, touch OK to display the Job Name Entry Screen.
Enter the desired job name in up to 8 characters from the touch screen keypad.
To correct an entry, touch 1-CHARACTER DELETE repeatedly to delete each character,
then enter the correct job name.
5 If the job name is correct, touch OK to display the Scanner Setting Screen.
NOTE: If an entered job name has already been used, the popup menu appears to ask you whether to rewrite
the data or to re-enter new name. Touch YES to rewrite, or NO to create new name.
Image Data Password Entry Screen
Scanner Setting Screen
11-5