Konica Minolta Di5510 User Manual page 336

Key Operator Mode
Memory Switch Setting [13] (continued)
[4] Program memory auto recall (30)
Program memory number 30 is automatically recalled when power is turned on or when
Panel Reset is restored.
This job recall function works only when Job number 30 is registered.
[5] Finisher mode by Full-auto
Set the Output Mode to be recalled when [Panel Reset] is pressed.
[6] Initial by Key counter insert
Set the machine to return to the initial state when Key counter is inserted.
[7] Erasure outside area of original
Set the machine to delete the outside area of originals.
[8] EDH frame erasure selection
Set Frame erasure to function anytime in EDH mode.
[9] Automatic tray switching
When paper is depleted during a copying job, the copier continues copying by switching to
another tray that contains the same size paper.
[10] Platen APS
The copier automatically selects the same size copy paper as the original placed on the
platen glass. (In reduction or enlargement mode, an appropriate paper size is selected
according to the ratio selected.)
[11] EDH APS
The copier automatically selects the same size copy paper as the original placed on the
EDH. (In reduction/enlargement mode, an appropriate paper size is selected according to
the ratio.)
[12] Platen AMS
The copier detects the size of the platen original and selects the appropriate magnification
ratio to correspond to the selected paper size.
[13] EDH AMS
After detecting the original size placed on the EDH the copier automatically selects an
appropriate ratio for the copy when copy size is selected manually.
13-44