Sort Mode Using Primary (Main) Tray - Konica Minolta Di5510 User Manual

Output Modes
Output Mode for Machine with Finisher (continued)

Sort Mode Using Primary (Main) Tray

Use this mode when you want to output multiple copies of the original set, and have each
sorted set offset upon exit. The staple mode can be selected with the sort mode.
With the Primary (main) tray initially selected on the Output Mode popup menu, FN-121/
FN-10/FN-115 outputs the printed sheets FACE DOWN in the proper order.
❒ Paper size: 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5", 5.5"x8.5"R
❒ Paper capacity for 20 lb: 500 sheets 5.5"x8.5"
Basic Screen
1 Touch SORT on the Basic Screen to highlight it.
2 Enter the desired print quantity.
3 Position originals in the EDH, and make copying selections as required.
When using Store mode, see p. 6-35 to p. 6-37.
4 Press [ Start ].
CAUTION:
When the selected print quantity exceeds the Finisher's maximum capacity, remove the printed sheets
while paper is exiting to avoid paper mishandling.
3,000 sheets 8.5"x11", 8.5"x11"R (FN-121/FN-115)
2,500 sheets 8.5"x11", 8.5"x11"R (FN-10)
1,500 sheets 11"x17", 8.5"x14"
3
2
1
3
2
1
30mm
7-5