Output Modes
Manual Finishing
The Manual Finishing function is available only with the Cover Inserter E option installed in
the FN-121/FN-10 Finisher. To use this convenient function, simply place a set of paper
into the lower tray of the Cover Inserter E, select the desired mode from the Manual
Finishing operation panel located on the top of the finisher, then press the Start/Stop
button.
Available finishing modes according to the optional configuration are described below.
FN-121 Finisher + Cover Inserter E
•
1 oblique staple: Primary (main) tray
•
2 parallel staples: Primary (main) tray
FN-121 Finisher + Cover Inserter E + PK-2/PK-5/PK-5 (US 2 HOLES) Punch Kit
•
1 oblique staple
•
2 parallel staples
•
Punch
FN-10 Finisher + Cover Inserter E
•
1 oblique staple
•
2 parallel staples
•
Stapling & Folding (2 staples in the center + Folding)
•
Three-Folding
FN-10 Finisher + Cover Inserter E + PK-2/PK-5/PK-5 (US 2 HOLES) Punch Kit
•
1 oblique staple
•
2 parallel staples
•
Stapling & Folding (2 staples in the center + Folding)
•
Three-Folding
•
Punch
Specifications for Manual Stapling 1 oblique staple and 2 parallel staples
❒ Paper size: 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5", A4, A4R (8.27"x11.69", 210mm x
297mm)
❒ Paper weight: 16 ~ 24 lb (20 lb paper is recommended)
❒ Staple capacity: 50 sheets max. (20 lb paper)
❒ Output tray: Primary (main) tray
Specifications for Manual Punch
❒ Paper size: 11"x17", 8.5"x11", A4 (8.27"x11.69", 210mm x 297mm)
❒ Paper weight: 16 ~ 24 lb (20 lb paper is recommended)
❒ Punch capacity: 200 sheets max. (24 lb paper) or within 30mm thick
❒ Output tray: Primary (main) tray
❒ The machine with ZK-3 Z-Fold Kit requires PK-2/PK-5/PK-5 (US 2 HOLES) Punch Kit to use this
function.
7-27