Table of Contents
Advertisement
Tandem Mode
Tandem Mode Operation (continued)
❒ When the two copiers in tandem mode have the same ECM password registered, copying will be
available by entering the ECM password in the primary copier only. The password will be
transmitted to the secondary copier.
❒ Interrupt copying is available only on the copier with [Interrupt] pressed.
❒ If the primary copier is installed with HDD, the image data stored in HDD can be output in tandem
mode copying.
❒ Corresponding tray sizes on the primary and secondary copiers should be the same when using
multiple trays for a single job.
❒ Incompatible Basic Copying Conditions: Rotation Sort, Rotation Group, Group, Rotation
❒ Incompatible Special Originals: None
❒ Incompatible Applications: Transparency Interleave, SET NUMBERING and WATERMARK
NUMBERING in Stamp
Output Mode popup menu
Basic Screen (primary copier)
1 Turn power on by pressing the Power switches of the two copiers.
2 Confirm that both copiers are ready to copy with the Basic Screen displayed.
3 Touch OUTPUT APPLI. on the Basic Screen of either copier to display the Output Mode
popup menu.
4 Touch TANDEM on the Output Mode popup menu to highlight it, then touch OK .
The copier with TANDEM highlighted will become the primary copier; the other copier
will function as the secondary copier. The Master icon displays on the Basic Screen of
the primary copier to indicate that the two units are ready to work in tandem mode.
12-3
Advertisement
Chapters
Table of Contents
Troubleshooting
