Application functions
11
Application functions
11.1
To use application function
Follow the procedure below to display the Application Screen and select the desired copying features.
To display application screen
1
Touch [COPY] tab on the Machine Status Screen to display the Copy Screen.
2
Touch [Application] on the Copy Screen.
–
The Application Screen will be displayed on the touch panel.
–
If you touch a function key, another screen or two will display to enable you to enter the appropriate
settings (except for Program Job, Non-Image Area Erase, Neg./Positive Reverse, and Image
Centering).
–
Various functions can be used in combination, however, if one function on the menu is incompatible
with another, it will appear dimmed.
Do you want to restore the previous setting?
?
% Touch [Cancel].
?
Do you want to cancel all the selected application functions with the setting made for each
remained?
% Touch [All Off] on the Application Screen.
Do you want to resume the initial setting?
?
% Press [Reset] on the control panel.
bizhub PRO C5501
11
11-3