Konica Minolta Di5510 User Manual page 339

Key Operator Mode
Memory Switch Setting [13] (continued)
[38] Bookmark function
Select to set the Bookmark function only for the current job, set for all the following jobs, or
deactivate the function.
[39] Delete of overlay image
When selecting (or storing) overlaying image data in HDD using Overlay Memory, select to
permit or prohibit deleting the selected data (or overwriting the data of the same name
previously stored in HDD).
[40] Orig. direction/binding mode
Select to reset or save the original direction and bind position settings made on the Special
Original popup menu and Output Mode popup menu after completion of each copying job.
[41] Image stored cont. (SRV)
When storing the image data in HDD/PC in scan/server mode, select to release or
continue the scan/server mode after completion of each image data storing job.
[42] Image recalled cont. (SRV)
When recalling the image data stored in HDD/PC in scan/server mode, select to recall only
one job or to recall multiple jobs.
[43] Exit direction
Select to exit face up or face down when making single-sided copies in non-sort or sort
mode using finisher primary (main) tray.
[44] I/P SCAN Address manual input
Select to permit or prohibit entering the IP address manually to transmit the scanned
image data.
[45] I/P SCAN E-Mail function mask
Select to mask or unmask the function to send the scanned image data by e-mail.
[46] I/P SCAN HDD function mask
Select to mask or unmask the function to store the scanned image data in the HDD.
[47] I/P SCAN FTP function mask
Select to mask or unmask the function to store the scanned image data in the FTP server.
13-47