Konica Minolta Di5510 User Manual page 338

Key Operator Mode
Memory Switch Setting [13] (continued)
[26] STOP key function
Select to display or not to display the confirmation message when [Stop] key is pressed.
[27] Auto select of Booklet copy
Set the copier with FN-10 mounted to automatically select the Booklet mode when
Stapling & Folding or Folding output mode is selected.
[28] E.C.M. password
Select the acceptable number of digits for the ECM master key code.
[29] Arrow key change (Image Shift)
Select the 1 step unit of the touch key to specify the shift amount in Image shift.
[30] Exit direction of 1 sheet
Select to exit face up or face down when making only 1 sheet of copy.
[31] An interruption suspend way
Select the timing to stop the job in progress when [Interrupt] is pressed.
[32] E.C.M. password input timing
Set the input timing for the ECM password.
[33] Key click sound (No paper/JAM)
Select the duration of the buzzer that alerts when the machine is out of paper or when
paper has misfed.
[34] Reserve copy function
Set the timing for the reserve job setting.
[35] Scan stop by a pull out tray
Select to stop or continue the scanning job when a tray is pulled out.
[36] Change page no. pos. (booklet)
Set the machine to position the page numbers automatically on the outside edges of the
copy when using Booklet with Page Numbering in Stamp.
[37] Timer which prohibits Print
Set the timer to allow the printing job after operating the copying job.
13-46