To Stop Scanning/Printing - Konica Minolta Di5510 User Manual

Tandem Mode

To Stop Scanning/Printing

To cancel the tandem copying job:
1 Press [Stop] on the control panel of the primary copier.
The scanning/printing job stops immediately, and the popup menu appears on the Basic
Screen of the primary copier to ask you whether to continue or terminate the job. At this
time, the tandem mode is not released.
2 Touch CONTINUE to go on, or EXIT to delete all the scanned data and to release the
tandem mode.
To cancel the job in the secondary copier only:
1 Press [Stop] on the control panel of the secondary copier.
The secondary copier stops the current operation immediately, and the popup menu
appears on the Basic Screen of the secondary copier to ask you whether to continue or
cease the operation. At this time, the tandem mode is not released.
NOTE: If temporary suspension in the secondary copier takes a long time, the Allocation recovery mode will
activate, enabling the primary copier to handle the remaining print quantity.
2 Touch CONTINUE to go on, or EXIT to delete all the data transmitted to the secondary
copier and to release the tandem mode.
The primary copier will take over the remaining print quantity and complete the job.
NOTE: Once the Allocation recovery mode is activated and the primary copier is already handling the remaining
print quantity, the secondary copier cannot continue with the tandem printing job, even when CONTINUE
is touched on the popup menu.
12-5