What is an ENERGY STAR® Product?........1-11 Explanation of Manual Conventions .........1-12 Explanation of Basic Concepts and Symbols ......1-13 Paper Feeding ................1-13 “Width” and “Length”..............1-14 Paper Orientation ..............1-14 Precaution Installation Precautions..............2-1 Installation Site ................2-1 Power Source ................2-1 Space Requirements ..............2-2 Di1610/Di1610p...
Page 4
Loading Paper into the Bypass Tray........3-20 Loading Paper into Tray2 (Optional)........3-21 Loading Originals ............... 3-22 Two Ways of Loading the Original ........... 3-22 Specific Types of Originals ............3-22 Loading Originals in the Auto Document Feeder ..... 3-22 Di1610/Di1610p...
Page 5
Using the Utility Mode Utility Mode..................5-1 Specifying the Machine Settings ..........5-1 Selecting the “MACHINE SETTING” Menu ........5-3 Specifying the Setting for “AUTO PANEL RESET” ....5-4 Specifying the Setting for “ENERGY SAVE MODE”....5-5 Specifying the Setting for “DENSITY (ADF)” ......5-5 Di1610/Di1610p...
Page 6
When the Message “ORIGINAL DOC. JAM” Appears ..... 6-19 Clearing a Paper Misfeed in Auto Document Feeder ....6-19 When the Message “PAPER SIZE ERROR” Appears....6-21 For Tray1 ................. 6-21 For the Bypass Tray..............6-22 When the Message “MACHINE TROUBLE” Appears ....6-23 Di1610/Di1610p...
Page 7
What Does Each Message Mean? ..........6-24 6.10 When Incorrect Copies Are Produced ........6-25 6.11 The machine is not functioning as designed ......6-28 Miscellaneous Specifications................7-1 Di1610/Di1610p................7-1 Auto Document Feeder AF-11............7-2 Paper Feed Cassette PF-125.............7-2 Care of the Machine ..............7-3 Cleaning ..................7-3 Housing Cover................7-3 Original Glass ................7-3 Original Pad................7-3...
Thank you for choosing the Di1610/Di1610p. This User Manual describes the functions, operating procedures, precautions, and basic troubleshooting for the Di1610/Di1610p. Before using this machine, be sure to read the User Manual thoroughly in order to ensure that you use the machine efficiently. After you have gone through the manual, store it in the holder and keep it handy at all times.
This device must be used with shielded interface cables. The use of non- shielded cable is likely to result in interference with radio communications and is prohibited under CISPR 22 rules and local rules. Di1610/Di1610p...
This symbol warns against possible causes of burns. A diagonal line indicates a prohibited course of action. This symbol warns against dismantling the device. A black circle indicates an imperative course of action. This symbol indicates you must unplug the device. Di1610/Di1610p...
If you continue using it in this condition, a fire or electrical shock could result. Do not throw the toner cartridge or toner into an open flame. The hot toner may scatter and cause burns or other damage. Di1610/Di1610p...
Dust that accumulates between the plug terminals may cause a fire. • When unplugging the power cord, be sure to hold onto the plug. Pulling on the power cord could damage the cord, resulting in a fire or electrical shock. Di1610/Di1610p...
Internal Laser Radiation Maximum Average Radiation Power: 36.903 µW at the laser aperture of the print head unit. Wavelength: 770-800 nm This product employs a Class 3b laser diode that emits an invisible laser beam. Di1610/Di1610p...
Page 15
Therefore, the print head unit should not be opened under any circumstances. Print Head Laser Aperture of the Print Head Unit There is a laser aperture at the location shown above, which must NEVER be viewed directly by the user. Di1610/Di1610p...
Usynlig laserstråling ved åbning, når sikkerhedsafbrydere er ude af funktion. Undgå udsættelse for stråling. Klasse 1 laser produkt der opfylder IEC60825 sikkerheds kravene. Dansk: Dette er en halvlederlaser. Laserdiodens højeste styrke er 15 mW og bølgelængden er 770-800 nm. Di1610/Di1610p...
Dersom apparatet brukes på annen måte enn spesifisert i denne bruksanvisning, kan brukeren utsettes for unsynlig laserstråling som overskrider grensen for laser klass 1. Dette en halvleder laser. Maksimal effekt till laserdiode er 15 mW og bølgelengde er 770-800 nm. Di1610/Di1610p...
Acoustic Noise For European Users Machine Noise Regulation 3 GSGV, 18.01.1991 : The sound pressure level at the operator position according to EN 27779 is equal to or less than 70dB(A). 1-10 Di1610/Di1610p...
“low-power mode” after a period of inactivity. An ® ENERGY STAR product uses energy more efficiently, saves you money on utility bills and helps protect the environment. Di1610/Di1610p 1-11...
Text formatted in this style provides additional assistance. § Text formatted in this style describes the action that will ensure the desired results are achieved. [Copy] key The names of keys on the control panel are written as shown above. 1-12 Di1610/Di1610p...
During printing, paper is supplied from the right side of the copier and fed into the Copy Tray on top with the printed surface of the page facing down. The paper feed direction is shown by the arrows in the diagram below. Di1610/Di1610p 1-13...
(B), the paper has a vertical or portrait orientation, indicated by either “L” or Crosswise ( If the width (A) of the paper is longer than the length (B), the paper has a horizontal or landscape orientation, indicated by either “C” or 1-14 Di1610/Di1610p...
A location that is not near any kind of heating devices Power Source The power source requirements are as follows. Voltage Fluctuation: AC110 V -10%, AC127 V +6%, or AC220-240 V ±10% Frequency Fluctuation: Within ±3Hz Use a power source with as few voltage or frequency fluctuations as possible. Di1610/Di1610p...
When lifting the machine, be sure to grab the handles on the left and right sides from the rear of the machine. If the machine is lifted from its front, it may become unbalanced and fall. Di1610/Di1610p...
A negligible amount of ozone is generated during normal operation of this machine. An unpleasant odor may, however, be detected in poorly ventilated rooms during extensive machine operations. § For a comfortable operating environment, it is recommended that the room be well ventilated. Di1610/Di1610p...
Keep all supplies out of the reach of children. CAUTION Be careful not to spill toner inside the machine or get toner on your clothes or hands. § If your hands become soiled with toner, immediately wash them with soap and water. Di1610/Di1610p...
Copyrighted works without permission of the copyright owner In addition, it is prohibited under any circumstances to copy domestic or foreign currencies, or works of art, without permission of the copyright owner. When in doubt about the nature of a document, consult with legal counsel. Di1610/Di1610p...
The main copy settings available with this machine are listed below. For details on their operation, refer to the pages indicated. Copies 1-sided copies (p. 4-1) 2in1 copies (p. 4-14) Zoom Ratio Reduced/Full Size/Enlarged (p. 4-9) Finishing Sort (p. 4-15) Di1610/Di1610p...
Before Making Copies Components and Their Functions Main Unit Di1610/Di1610p Auto Document Feeder AF-11 (option) Automatically feeds originals one page after another for scanning. Paper Feed Cassette PF-125 (option) Capable of holding up to 500 sheets of paper. 32MB Memory M32-5 (option) Increases the machine’s memory.
Before Making Copies Parts Names and Their Functions Main Unit Di1610/Di1610p...
Page 32
Use to turn the machine on and off. (p. 3-10) USB Port For more details, refer to the User Manual for the printer controller. Parallel Port For more details, refer to the User Manual for the printer controller. Fuser Cover Not used Di1610/Di1610p...
Before Making Copies Inside the Machine Part Name Description Imaging Cartridge Generates the copy image. The Imaging Cartridge is constructed of both the Drum Cartridge and the Toner Cartridge set into place. Di1610/Di1610p...
2. When back curled paper is fed out 3. When clearing a paper misfeed or replacing the Drum Cartridge or Toner Cartridge Note Adjust the Tray Extension and Paper Stopper to fit the size of the paper. For Legal-size paper For A4-size paper For Letter-size paper Di1610/Di1610p...
Slide the guide plate to the size of the originals. (p. 3-23) Plate Document Exit Receives originals which have been scanned by the machine. Tray Paper Feed Cassette PF-125 Part Name Description Tray2 Holds up to 500 sheets of paper. (p. 3-21) Di1610/Di1610p...
Press to reset all copy functions and settings to their defaults. [Start] key • Press to start a scanning or print cycle. • Press to specify the various settings. • The indicator lights up in green when the machine can accept copy jobs. Di1610/Di1610p...
Displays the currently specified zoom ratio. Number of copies Displays the currently specified number of copy pages and number of copy sets. Image density Displays the currently specified image density. Paper Displays the currently selected paper tray, paper size and paper type. Di1610/Di1610p...
Original Glass, and pressing the [Start] key. Pressing the [Start] key at this time will not immediately start the copy cycle. You will have to wait for less than 25 seconds (at an ambient temperature of 23°C (73.4°F)). 3-10 Di1610/Di1610p...
Number of copies: 1 Image density: TEXT Auto Zoom ratio: 100% (full size) Paper: Tray1 Finishing: Non-Sort The default settings can be customized from the Utility mode. For more details, refer to “Using the Utility Mode” on page 5-1. Di1610/Di1610p 3-11...
To cancel the Energy Save mode, press any key on the control panel. The length of time before the machine enters the Energy Save mode can be set between 1 min and 240 min. For more details, refer to “Specifying the Setting for “ENERGY SAVE MODE”” on page 5-5. 3-12 Di1610/Di1610p...
If the optional Paper Feed Cassette is installed, a maximum of 750 pages can be continuously printed. → Tray1 Tray2 (Paper Feed Cassette) → Tray2 (Paper Feed Cassette) Tray1 Auto tray switching can be disabled. For details, refer to “Setting Up the Paper Sources” on page 5-9. Di1610/Di1610p 3-13...
Paper of a non-standard shape (not rectangular) Paper that is bound with glue, staples or paper clips Paper with labels attached Paper with ribbons, hooks, buttons, etc. attached Curled or wrinkled paper Art paper, coated paper or inkjet printer paper Di1610/Di1610p 3-15...
When loading additional paper, remove any paper remaining in the drawer, place it on top of the new paper, and then align the paper in the stack well before loading it into the drawer. 3-16 Di1610/Di1610p...
Page 45
Tray1 Only 1 envelope at a time can be loaded in Tray1 and the Bypass Tray. We recommend replenishing the paper only after all of the paper in the drawer has been used. Di1610/Di1610p 3-17...
Slide the paper guides against the edges of the paper. When Legal-size paper is If Legal-size paper is installed, installed open the door of Tray1. Attach the Bypass Tray in its original position. 3-18 Di1610/Di1610p...
Page 47
If paper with a different size or type is loaded, various settings must be specified from the “PAPER SOURCE SETUP” menu in the Utility mode. If the settings are not correctly specified, paper size error may occur. For details, refer to “Specifying the Setting for “TRAY SETTING”” on page 5-12. Di1610/Di1610p 3-19...
When paper is loaded into the Bypass Tray, the paper size and type must be specified, otherwise paper size error may occur. For details, refer to “Specifying the Size and Type of Manually Fed Paper” on page 4-5. 3-20 Di1610/Di1610p...
Load the paper into the drawer so that the front side of the paper (the side facing up when the package was unwrapped) faces up. Attach the drawer cover, and then return the drawer for Tray2 to its original position. Di1610/Di1610p 3-21...
Coated originals such as carbon-backed paper Up to 25 A4-size document pages can be scanned and stored in the memory at one time. However, if the optional expansion memory is installed, up to 180 scanned pages can be stored. 3-22 Di1610/Di1610p...
Slide the front adjustable Document Guide Plate to the size of the originals. Specify the desired copy settings. “Making Copies” on page 4-1 Press the [Start] key to start feeding and copying the originals from the top page. Di1610/Di1610p 3-23...
Original Glass. Although the light that shines through the Original Glass is bright, it is not a laser beam and, therefore, is not as dangerous. 3-24 Di1610/Di1610p...
Original Scales. Gently lower the Auto Document Feeder or Original Cover. Specify the desired copy settings. “Making Copies” on page 4-1 Press the [Start] key to start the copy cycle. Di1610/Di1610p 3-25...
Place a blank sheet of paper of the same size over the original. Gently lower the Auto Document Feeder or Original Cover. Specify the desired copy settings. “Making Copies” on page 4-1 Press the [Start] key to start the copy cycle. 3-26 Di1610/Di1610p...
Glass. Although the light that shines through the Original Glass is bright, it is not a laser beam and, therefore, is not as dangerous. Specify the desired copy settings. “Making Copies” on page 4-1 Press the [Start] key to start the copy cycle. Di1610/Di1610p 3-27...
PRINT REPORT* CONFIGURATION PAGE Prints the current machine configuration. PCL FONT LIST Prints the font list. * PRINT REPORT appears only for the Di1610p. Checking the “TOTAL PAGE” Counts Press the [Status] key. Status Press the [Yes] key. 3-28 Di1610/Di1610p...
Page 57
Before Making Copies Press the [▼] and [▲] keys to check the “TOTAL COUNT” or “TOTAL SCAN” values. Di1610/Di1610p 3-29...
The following reports and lists can be printed. Configuration Page The list of the printer settings is printed. PCL Font List The list of fonts can be printed in order to be checked. 3-30 Di1610/Di1610p...
For details on using the copier to print from a computer when the printer controller is installed, refer to the User Manual for the printer controller. A: 4 mm (at full size) B: 4 mm (at full size) C: 4 mm (at full size) Paper output direction Di1610/Di1610p 3-31...
Page 60
Before Making Copies 3-32 Di1610/Di1610p...
Position the original. “Loading Originals” on page 3-22 Select the paper tray. “Selecting the Paper” on page 4-3 Specify the zoom ratio. “Specifying the Zoom Ratio” on page 4-9 Specify the image density. “Adjusting the Image Density” on page 4-11 Di1610/Di1610p...
Page 62
This will start the copy cycle. To stop the copy cycle in mid- operation, press the [Stop] key. To cancel the copy job, press the [No] key or the [Panel Reset] key. To restart the copy cycle, press the [Start] key. Di1610/Di1610p...
The optional Paper Feed Cassette is required. Selecting Manually Fed Paper When the desired paper is loaded into the Bypass Tray and the paper size and type are specified, paper loaded into the Bypass Tray is given priority during feeding. Di1610/Di1610p...
Make the other necessary settings. “Specifying the Zoom Ratio” on page 4-9 “Adjusting the Image Density” on page 4-11 Using the 10-Key Pad, enter the number of copies to be made, and then press the [Start] key. This will start the copy cycle. Di1610/Di1610p...
Press the [ ] and [ ] keys until the Ö desired paper type is selected. Ö Pressing the [ ] and [ ] keys Ö moves “ ” to select the paper type. To return to the previous message, press the [No/C] key. Press the [Yes] key. Di1610/Di1610p...
Page 66
A4 and Letter. Ö Pressing the [ ] and [ ] keys Ö moves “ ” to select the paper size. To return to the previous message, press the [No] key. Di1610/Di1610p...
Page 67
90 mm to 216 mm. When entering the paper size, refer to the diagram on the right Tray 1 side of the screen to check which sides of the paper are the width and the length. Bypass Tray Press the [Yes] key. Di1610/Di1610p...
Page 68
Bypass Tray and then reload it. Repeat steps 11 and 12. Note The Bypass Tray can be loaded with a maximum of 1 envelope, 1 OHP transparency, 1 card, or 10 sheets of plain paper. Di1610/Di1610p...
Pressing the [▼] or [▲] key increases or decreases the zoom × [t] and [s] keys ratio in 0.01 increments. × × The ratio can range from 0.50 to 2.00. Full Size This setting makes a copy the same size as the original × 1.00). Di1610/Di1610p...
[▼] and [▲] keys until the desired zoom ratio is specified. Make the other necessary settings. “Adjusting the Image Density” on page 4-11 Using the 10-Key Pad, enter the number of copies to be made, and then press the [Start] key. 4-10 Di1610/Di1610p...
Select the appropriate level according to your original. Photo mode: Select “Photo” when making a copy from an original having large halftone images, such as photos. Di1610/Di1610p 4-11...
[ ] key to select the desired setting. The displays for manually Light (level -4) selected image densities are (level -3) shown at the right. (level -2) (level -1) Standard (level 0) (level 1) (level 2) (level 3) Dark (level 4) 4-12 Di1610/Di1610p...
Page 73
Making Copies Make the other necessary settings. “Selecting the Paper” on page 4-3 “Specifying the Zoom Ratio” on page 4-9 Using the 10-Key Pad, enter the number of copies to be made, and then press the [Start] key. Di1610/Di1610p 4-13...
2in1 Make the other necessary settings. “Selecting the Paper” on page 4-3 “Adjusting the Image Density” on page 4-11 Using the 10-Key Pad, enter the number of copies to be made, and then press the [Start] key. 4-14 Di1610/Di1610p...
Non-Sort: Copying 1 set The copies are stacked on top of each other as they are made Copying 3 sets Sort: Copying 3 sets Documents containing multiple pages can be copied and automatically separated into the individual sets. Di1610/Di1610p 4-15...
“Selecting the Paper” on page 4-3 “Specifying the Zoom Ratio” on page 4-9 “Adjusting the Image Density” on page 4-11 Using the 10-Key Pad, enter the number of copies to be made, and then press the [Start] key. 4-16 Di1610/Di1610p...
The density when scanning from the Original Glass can be adjusted. Mode 1: For printing copies with same density as documents. Mode 2: For printing lighter copies of dark documents to avoid darkening of copies. • The factory default setting is “Mode 1”. Di1610/Di1610p...
Page 78
The time until the exposure lamp goes off can be adjusted. Mode 1: When four hours have passed since the last operation was performed Mode 2: When the machine enters Energy Save mode • The factory default setting is “Mode 1”. Di1610/Di1610p...
3 DENSITY (ADF) 4 DENSITY (BOOK) 5 PRINT DENSITY 6 LCD CONTRAST 7 LANGUAGE 8 LAMP OFF TIME To quit changing the machine settings, press the [No] key. “STOP SETTING?” appears. Press the [Yes] key to quit changing the settings. Di1610/Di1610p...
If “OFF” was selected, “MACHINE SETTING” appears again. Note If “OFF” was selected, the Auto Panel Reset function is disabled. Ö Press the [ ] and [ ] keys to select Ö the desired time period (min). Press the [Yes] key. Di1610/Di1610p...
Specifying the Setting for “DENSITY (ADF)” Select “DENSITY (ADF)”. Refer to “Selecting the “MACHINE SETTING” Menu” on page 5-3. Ö Press the [ ] and [ ] keys to select Ö either “Mode 1” or “Mode 2”. Press the [Yes] key. Di1610/Di1610p...
Select “PRINT DENSITY”. Refer to “Selecting the “MACHINE SETTING” Menu” on page 5-3. Ö Press the [ ] and [ ] keys to select Ö one of the seven print density levels between “LIGHT” and “DARK”. Press the [Yes] key. Di1610/Di1610p...
“LIGHT” and “DARK”. Press the [Yes] key. Specifying the Setting for “LANGUAGE” Select “LANGUAGE”. Refer to “Selecting the “MACHINE SETTING” Menu” on page 5-3. Press the [▼] and [▲] keys to select the desired language. Press the [Yes] key. Di1610/Di1610p...
Specifying the Setting for “LAMP OFF TIME” Select “LAMP OFF TIME”. Refer to “Selecting the “MACHINE SETTING” Menu” on page 5-3. Ö Press the [ ] and [ ] keys to select Ö either “Mode 1” or “Mode 2”. Press the [Yes] key. Di1610/Di1610p...
SETUP function that you wish to set. The PAPER SOURCE SETUP functions are as follows: 1 TRAY1 PAPER 2 TRAY SETTING To quit setting up the paper sources, press the [No] key. “STOP SETTING?” appears. Press the [Yes] key to quit changing the settings. Di1610/Di1610p...
A4 L and Letter L. Ö Pressing the [ ] and [ ] keys moves “ ” to select the paper Ö size. To return to the previous message, press the [No] key. 5-10 Di1610/Di1610p...
Page 87
Using the 10-Key Pad, enter the length (Y) of the loaded paper. 140-356 To clear the entered value, press the [No] key. Note The paper width can range from 140 mm to 356 mm. Press the [Yes] key. Di1610/Di1610p 5-11...
Paper Feed Cassette is installed. Press the [Yes] key. Ö Press the [ ] and [ ] keys to select Ö either “FIXED” (auto tray switching disabled) or “CONTINUOUS” (auto tray switching enabled). Press the [Yes] key. 5-12 Di1610/Di1610p...
For details on replacing the drum cartridge, refer to “When the Message “D/C LIFE” Appears” on page 6-9. To select the “USER MANAGEMENT” menu Press the [Utility] key three times. “USER MANAGEMENT” appears. Press the [Yes] key. Press the [Yes] key. Di1610/Di1610p 5-13...
• The factory default setting is “NON”. RESOLUTION The default resolution when scanning with the Auto Document × × Feeder can be set to “600 dpi 300 dpi” or “600 dpi 600 dpi”. × • The factory default setting is “600 dpi 300 dpi”. 5-14 Di1610/Di1610p...
2 DENSITY PRIORITY 3 DENSITY LEVEL (A) 4 DENSITY LEVEL (M) 5 OUTPUT PRIORITY 6 RESOLUTION To quit changing the copy settings, press the [No] key. “STOP SETTING?” appears. Press the [Yes] key to quit changing the settings. Di1610/Di1610p 5-15...
Specifying the Setting for “DENSITY PRIORITY” Select “DENSITY PRIORITY”. Refer to “Selecting the “COPY SETTING” Menu” on page 5-15. Ö Press the [ ] and [ ] keys to select Ö either “AUTO”, “MANUAL” or “PHOTO”. Press the [Yes] key. 5-16 Di1610/Di1610p...
Select “DENSITY LEVEL (M)”. Refer to “Selecting the “COPY SETTING” Menu” on page 5-15. Ö Press the [ ] and [ ] keys to select Ö one of the nine print density levels between “LIGHT” and “DARK”. Press the [Yes] key. Di1610/Di1610p 5-17...
Specifying the Setting for “RESOLUTION” Select “RESOLUTION”. Refer to “Selecting the “COPY SETTING” Menu” on page 5-15. Ö Press the [ ] and [ ] keys to select Ö either “600 × 300” or “600 × 600”. Press the [Yes] key. 5-18 Di1610/Di1610p...
When the currently selected paper tray runs out of paper, the message shown below appears, and printing cannot continue. Paper tray Paper size Check the paper tray that has run out of paper, and then supply paper according to the following procedures. Indicator Paper Tray Tray1 Tray2 Bypass Tray Di1610/Di1610p...
Load the paper so that the front side of the paper (the side facing up when the package was unwrapped) faces up. Note The Bypass Tray can be loaded with a maximum of 1 envelope, 1 OHP transparency, 1 card, or 10 sheets of plain paper. Di1610/Di1610p...
Load the paper into the drawer so that the front side of the paper (the side facing up when the package was unwrapped) faces up. Attach the drawer cover, and then return the drawer for Tray2 to its original position. Di1610/Di1610p...
Replace the toner cartridge. Toner empty CAUTION Used Toner Cartridges § In order to prevent the used Toner Cartridge from dirtying anything, keep it in the box. § Dispose of the used Toner Cartridge according to your local regulations. Di1610/Di1610p...
Page 99
Never use any other types of toner, as a malfunction could result. For details, contact your service representative. Before replacing the toner cartridge, check that it is of the following type: Toner Cartridge 101 A. Do not use a toner cartridge of a different type. Di1610/Di1610p...
Since the Imaging Cartridge can easily be damaged by light, exposing the cartridge to light for a long period of time will result in decreased image quality. Move the lever in the direction of the arrow to release the lock. Remove the Toner Cartridge from the Drum Cartridge. Di1610/Di1610p...
Page 101
Do not touch the PC drum under the flap of the Drum Cartridge, otherwise decreased image quality may result. Do not touch any metal parts of the Drum Cartridge or Toner Cartridge, otherwise the units may be damaged by static electricity. Shake the new Toner Cartridge well. Di1610/Di1610p...
Page 102
Cartridge with the rail in the machine, and then install the cartridge. Note Do not push in the Imaging Cartridge with excessive force if the cartridge is not correctly aligned on the rail, otherwise the units may be damaged. Close the Front Cover. Di1610/Di1610p...
CAUTION Used Drum Cartridges § In order to prevent the used Drum Cartridge from dirtying anything, keep it in the box. § Dispose of the used Drum Cartridge according to your local regulations. Di1610/Di1610p...
Move the lever in the direction of the arrow to release the lock. Remove the Toner Cartridge from the Drum Cartridge. 6-10 Di1610/Di1610p...
Page 105
Cartridge with the rail in the machine, and then install the cartridge. Note Do not push in the Imaging Cartridge with excessive force if the cartridge is not correctly aligned on the rail, otherwise the units may be damaged. Di1610/Di1610p 6-11...
Page 106
When a Message Appears Close the Front Cover. Note After replacing the Drum Cartridge, specify the necessary setting for the function on the “USER MANAGEMENT” menu in the Utility mode. 6-12 Di1610/Di1610p...
Follow the procedure described below to clear the misfed paper. Paper supply section Clearing a Paper Misfeed in the Paper Trays Remove all paper from the Bypass Tray. Remove the Bypass Tray. Di1610/Di1610p 6-13...
Page 108
Reload the paper removed in step 1. Remove the cover of optional Tray2, and then pull out the drawer. Remove all paper from the drawer. Reload the paper stack into the drawer, and then slide the drawer back into the Paper Feed Cassette. 6-14 Di1610/Di1610p...
Page 109
When a Message Appears Open, then close the Front Cover. Di1610/Di1610p 6-15...
Follow the procedure described below to clear the misfed paper. Fusing section Separating section CAUTION The area around the Fusing Unit is extremely hot. § Touching any part other than the paper may result in burns. Clearing a Paper Misfeed in the Machine Open the Front Cover. 6-16 Di1610/Di1610p...
Page 111
Grab both sides of the paper, and then carefully pull the sheet of paper straight upward. Grab both sides of the paper, and then carefully pull the sheet of paper straight downward. Di1610/Di1610p 6-17...
Page 112
Close the Front Cover. If “PAPER JAM” remains displayed, even after the misfeed-clearing procedure is performed, refer to “What Does Each Message Mean?” on page 6-24. 6-18 Di1610/Di1610p...
Auto Document Feeder. Follow the procedure described below to clear the misfed paper. Automatic paper supply section Clearing a Paper Misfeed in Auto Document Feeder Open the Document Feeder Cover. Unload the document from the Document Feeder Tray. Di1610/Di1610p 6-19...
Page 114
2 back into the tray. Note Replace the document page that was misfed, according to the page number indicated in the Display. If “ORIGINAL DOC. JAM” remains displayed, even after clearing misfed document, perform the misfeed-clearing procedure again. 6-20 Di1610/Di1610p...
Select “TRAY1 PAPER”. “Selecting the “PAPER SOURCE SETUP” Menu” on page 5-9 Press the [1] key of the 10-Key Pad, and then specify the correct paper type and size. “Specifying the Setting for “TRAY1 PAPER”” on page 5-10 Di1610/Di1610p 6-21...
Remove the Bypass Tray, and then remove all paper from the Tray1. Load the desired paper into the tray. Try performing the copy cycle again. For the Bypass Tray Remove all paper from the Bypass Tray. Load the desired paper into the tray. 6-22 Di1610/Di1610p...
When the Message “MACHINE TROUBLE” Appears If the message shown below appears, some machine malfunction has occurred. Contact your service representative. Note When contacting the service representative, be sure to inform them of the machine code (error code: C####) that was indicated. Di1610/Di1610p 6-23...
Front Cover. INCORRECT T/C TYPE Incorrect type of toner Install the correct type of cartridge is installed. toner cartridge. (p. 6-4) Toner cartridge is not Install the toner cartridge. CHANGE T/C installed. (page 6-6) 6-24 Di1610/Di1610p...
The original is not held tightly Place the original in position against the Original Glass. so that it is held tightly against the Original Glass. The copy is blurry. The paper is damp. Change the paper. Di1610/Di1610p 6-25...
Page 120
The printed page is curled. The paper that was used Remove the paper from the curls easily (as with recycled paper tray, turn it over, and paper). then load it again. Change the paper. 6-26 Di1610/Di1610p...
Page 121
Otherwise, make a reduced reduction ratio). copy with a zoom ratio that matches the paper size. * If the problem is not corrected even after the operations described above are performed, contact your service representative. Di1610/Di1610p 6-27...
The room’s circuit breaker is Close the room’s circuit open. breaker. * If the problem is not corrected even after the operations described are performed, turn off the machine, unplug its power cord, and then contact the service representative. 6-28 Di1610/Di1610p...
Miscellaneous Miscellaneous Specifications Di1610/Di1610p Specification Type Desktop Platen Type Fixed platen (unit scanning) Photoconductor Copying System Electrostatic Dry Powdered Image Transfer to Plain Paper Developing System Single component developing system Fusing System Lamp-Heated Roller Resolution 600 dpi × 600 dpi...
Plain paper, recycled paper (60 g/m to 90 g/m Paper Sizes A4 L, Letter L Capacity 500 sheets (80 g/m Power Consumption Less than 7 W × × Dimensions 401 mm (width) 615 mm (depth) 138 mm (height) Weight 4.3 kg Di1610/Di1610p...
Original Glass § Wipe the surface of the Original Glass clean with a soft, dry cloth. Original Pad § Wipe the surface of the Original Pad clean with a soft cloth dampened with a mild household detergent. Di1610/Di1610p...
Control Panel § Wipe the surface of the Control Panel clean with a soft, dry cloth. Note Incorrectly cleaning the Control Panel keys may damage them. Never use mild household detergent or glass cleaner to clean the Control Panel. Di1610/Di1610p...
Government Letter 8 × 10-1/2 203 mm × 267 mm Quarto 8 × 10 203 mm × 254 mm Statement Invoice 5-1/2 × 8-1/2 140 mm × 216 mm 4 × 6 4 × 6 102 mm × 152 mm Di1610/Di1610p...
Page 130
× 0.64 215.9 mm × 330.2 mm 11 × 17 × 1.29 11 × 14 × 1.07 Letter Invoice × 0.64 8-1/2 × 11 11 × 17 × 1.29 215.9 mm × 279.4 mm 11 × 14 × 1.27 Di1610/Di1610p...
Page 131
× 2.00 5-1/2 × 8-1/2 11 × 14 × 1.64 139.7 mm × 215.9 mm Legal × 1.54 Foolscap × 1.52 Letter × 1.29 Zoom ratio = Paper size/Document size 1 inch = 25.4 mm 1 mm = 0.0394 inch Di1610/Di1610p...
Basic copy operation ................4-1 Care of the machine ................7-3 Control panel ..................3-8 Copy paper ..................3-14 Copy settings ..................5-14 Copy tray Angle ....................3-6 D/C life ....................6-9 Default settings ..................3-11 Energy save mode ................3-12 Finishing copies .................4-15 Function combination matrix ..............7-5 Di1610/Di1610p...
Page 134
Paper size error ................6-21 Toner empty .................. 6-4 Operating environment ............... 2-3 Paper Paper specifications ..............3-14 Unsuitable paper ................. 3-15 Paper feed cassette PF-125 ............... 7-2 Paper feeding ..................1-13 Paper length ..................1-14 Paper orientation ................1-14 Di1610/Di1610p...
Page 135
Power source ..................2-1 Print area ...................3-31 Replacing Toner cartridge ................6-6 Resetting Auto panel reset ................3-12 Panel ....................3-12 Sorting ....................4-16 Space requirements ................2-2 Specifications ..................7-1 Turning Off ....................3-10 On ....................3-10 User management setting ..............5-13 Utility mode ..................5-1 Zoom ratio ................... 4-9 Di1610/Di1610p...