For Users in countries not subject to Class B regulations...2-6 Laser Safety...2-6 Internal Laser Radiation ...2-6 CDRH Regulation...2-7 For European Users...2-7 For Denmark Users...2-8 For Finland, Sweden Users...2-8 For Norway Users ...2-9 Laser Safety Label ...2-9 Ozone Release ...2-9 Acoustic Noise ...2-10 Di2010/Di2510/Di3010/Di3510 ...1-7 ® Product?...1-7...
Page 3
Printing Distribution Numbers on Sets of Copies ... 4-16 To make settings for the “Distribution #” function ... 4-16 “Watermark” Function ... 4-18 Printing Copies with a Watermark ... 4-18 To make settings for the “Watermark” function ... 4-18 Contents Di2010/Di2510/Di3010/Di3510...
Page 4
To set the “Intelligent Sorting” function ...5-25 To set the “Output Tray” function (optional) ...5-26 To set the ““Small” Originals” function...5-27 To set the “Scanner Dry” function ...5-28 To set the “Crease/Center Staple” function (Only when the finisher or saddle kit are installed) ...5-29 Di2010/Di2510/Di3010/Di3510...
Page 5
To disable the Sleep mode... 6-10 Account Management Settings ... 6-11 Account Management Mode... 6-11 To set the Account Management Mode... 6-12 Account Information data... 6-14 To print account information data ... 6-14 Clear all counters... 6-15 Changing Account Information ... 6-16 Contents Di2010/Di2510/Di3010/Di3510...
Page 6
Specifying Settings for Resetting Copy Mode with the Duplexing Document Feeder Installed (Mode 429) ...6-24 Removing Penalties ...6-25 Free Penalty...6-25 Appendix Specifications...7-2 Copier Di2010/Di2510/Di3010/Di3510 ...7-2 Duplexing Document Feeder AFR-19 ...7-4 Mixed Width Document Sizes ...7-4 Duplex Unit AD-16 ...7-5 Switchback Unit SB-1...7-5 Paper Feed Cabinet PF-124 ...7-5 2Way Paper Feed Cabinet PF-210 ...7-6...
Page 7
Consumables ... 7-22 Paper ... 7-22 Toner Bottle ... 7-22 Staple Cartridges... 7-23 Index Index ... 8-2 Contents Di2010/Di2510/Di3010/Di3510...
For details on the following topics, refer to the “Basic Operations” volume of this User Manual. 1 Introduction 2 Available Features 3 Before Making Copies 4 Basic Copy Operations 5 Copy Paper 6 Original Documents 7 Specifying Copy Settings 8 Touch Panel Messages 9 Troubleshooting 10 Index Di2010/Di2510/Di3010/Di3510...
Page 9
Contents viii Di2010/Di2510/Di3010/Di3510...
Basic Operations This volume contains precautions for using the machine and descriptions on the procedures for basic operations. The Basic Operations volume is a quick reference for immediate use of the copier. 1.1 Introduction Di2010/Di2510/Di3010/Di3510...
Text formatted in this style describes the action that will ensure the desired results are achieved. [Copy] key The names of keys on the control panel are written as shown above. Di2010/Di2510/Di3010/Di3510 An illustration inserted here shows what operations must be performed.
During printing, paper is supplied from the right side of the copier and fed into the output tray on top or the output option at the left with the printed surface of the page facing down. The paper feed direction is shown by the arrows in the diagram below. Di2010/Di2510/Di3010/Di3510...
(X), the paper has a horizontal or landscape orientation, indicated by either “C” Portrait and Landscape Portrait With the “portrait” orientation, the paper is vertical, like a portrait. Landscape With the “landscape” orientation, the paper is horizontal, like a landscape. Di2010/Di2510/Di3010/Di3510...
Display Icons Plain paper Thick paper Overhead projector transparencies Envelope Paper Supply Icons The icons shown below may appear, indicating that no more paper remains. The paper is empty. 1.3 Explanation of Basic Concepts and Symbols Di2010/Di2510/Di3010/Di3510...
Recycled Paper (USA market only) Your Minolta machine has been designed to use the following Recycled Paper. Minolta Recycled Bond: Item No. 8925 701 20% Post Consumer Waste Di2010/Di2510/Di3010/Di3510 ® Product? ®...
Page 17
1.5 Recycled Paper (USA market only) Di2010/Di2510/Di3010/Di3510...
This symbol warns against cause burns. A diagonal line indicates a prohibited course of action. This symbol warns against dismantling the device. A black circle indicates an imperative course of action. This symbol indicates you must unplug the device. 2.1 Warning and Precaution Symbols Di2010/Di2510/Di3010/Di3510...
If you keep on using it as is, a fire or electrical shock could result. Do not throw the toner cartridge or toner into an open flame. The hot toner may scatter and cause burns or other damage. Di2010/Di2510/Di3010/Di3510...
Dust that accumulates between the plug terminals may cause a fire. • When unplugging the power cord, be sure to hold onto the plug. Pulling on the power cord could damage the cord, resulting in a fire or electrical shock. 2.2 Meaning of Symbols Di2010/Di2510/Di3010/Di3510...
FCC regulations. This device must be used with shielded interface cables. The use of non-shielded cable is likely to result in interference with radio communications and is prohibited under FCC rules. Di2010/Di2510/Di3010/Di3510...
This product employs a Class 3b laser diode that emits an invisible laser beam. The laser diode and the scanning polygon mirror are incorporated in the print head unit. The print head unit is NOT A FIELD SERVICE ITEM: Di2010/Di2510/Di3010/Di3510...
This is a semiconductor laser. The maximum power of the laser diode is 5mW and the wavelength is 770-795 nm. Di2010/Di2510/Di3010/Di3510 Laser Aperture of the Print Head Unit There is a laser aperture at the location shown above, which must, however, NEVER be viewed directly by the user.
Det här är en halvledarlaser. Den maximala effekten för laserdioden är 5mW och våglängden är 770-795 nm. VARO! Avattaessa ja suojalukitus ohitettaessa olet alttiina näkymättömälle lasersäteilylle. Älä katso säteeseen. VARNING! Osynlig laserstrålning när denna del är öppnad och spärren är urkopplad. Betrakta ej strålen. 2.5 Laser Safety Di2010/Di2510/Di3010/Di3510...
An unpleasant odor may, however, be created in poorly ventilated rooms during extensive machine operations. For a comfortable, healthy, and safe operating environment, it is recommended that the room well ventilated. Di2010/Di2510/Di3010/Di3510 For United States MINOLTA CO., LTD 2, Higashiakatsuchi, Yawata-cho, Toyokawa-shi...
Acoustic Noise For European Users Machine Noise Regulation 3 GSGV, 18.01.1991 : The sound pressure level at the operator position according to EN 27779 is equal to or less than 70dB(A). 2-10 2.5 Laser Safety Di2010/Di2510/Di3010/Di3510...
Power Source The power source requirements are as follows. Voltage fluctuation: Maximum ±10% (127 V: +6%, –10% ) Frequency fluctuation: Maximum ±0.3 Hz ❍ Use a power source with as little voltage or frequency fluctuations as possible. 3.1 Installation Precautions Di2010/Di2510/Di3010/Di3510...
69-1/4 (1757) 4-3/4 51-3/4 (1312) (121) Note Be sure to allow a clearance of 4 in. (100 mm) or more at the back of the copier for the ventilation duct. Di2010/Di2510/Di3010/Di3510 44-3/4 (1138) 12-3/4 28 (710) (324) (328) 16-1/2 24-1/4...
✚ Always unplug the copier from the electrical outlet if the unit is not to be used for a long period of time. ✚ Always provide good ventilation when making a large number of continuous copies. 3.2 Operation Precautions Di2010/Di2510/Di3010/Di3510...
Store in a sealed plastic bag in a cool, dark place paper that has been removed from its wrapper but not loaded into the copier. Only use toner that has been manufactured specifically for this copier. Never use other types of toner. Keep all supplies out of the reach of children. Di2010/Di2510/Di3010/Di3510...
Copies that are to be kept for a long time should be kept where they are not exposed to light in order to prevent them from fading. Adhesive that contains solvent (e.g., spray glue) may dissolve the toner on copies. 3.2 Operation Precautions Di2010/Di2510/Di3010/Di3510...
Copyrighted works without permission of the copyright owner In addition, it is prohibited under any circumstances to copy domestic or foreign currencies, or works of art without permission of the copyright owner. When in doubt about the nature of a document, consult with legal counsel. Di2010/Di2510/Di3010/Di3510...
Page 35
3.3 Legal Restrictions on Copying Di2010/Di2510/Di3010/Di3510...
The optional duplexing document feeder must be installed. Cover Mode settings Front Cover: Blank Back Cover: None Front Cover: Blank Back Cover: Blank Front Cover: Blank Back Cover: With Image 4.1 “Cover Mode” Function Original Document Copy Di2010/Di2510/Di3010/Di3510...
Front Cover: With Image Back Cover: Blank Front Cover: With Image Back Cover: With Image To make settings for the “Cover Mode” function Load the document into the duplexing document feeder. Touch [Auxiliary], and then touch [Cover Mode]. Di2010/Di2510/Di3010/Di3510 Original Document Copy...
Page 39
Select the paper drawer that contains the paper for the cover pages, and then touch [Enter]. Touch [Enter]. ❍ If [Cancel] is touched, the setting is cancelled. Press the [Start] key. The copies are printed. 4.1 “Cover Mode” Function Di2010/Di2510/Di3010/Di3510...
This function can be used together with the “Cover Mode” function. This function cannot be used together with booklet-printing and mixed original sizes. Note The optional duplexing document feeder must be installed. Paper Insertion settings Blank With Image Di2010/Di2510/Di3010/Di3510...
“Insert Paper”. Select the paper drawer that contains the paper for the interleaves, and then touch [Enter]. Touch [Enter]. ❍ If [Cancel] is touched, the setting is cancelled. Press the [Start] key. The copies are printed. 4.2 “Page Insertion” Function Di2010/Di2510/Di3010/Di3510...
When copying overhead projector transparencies, paper (interleaves) can be in- serted between copies of the transparencies. Load the paper for the interleaves into a paper drawer, and load the overhead projector transparencies into the multiple bypass tray. OHP Interleaving settings Blank With Image Di2010/Di2510/Di3010/Di3510...
Select either the [With Image] or the [Blank] OHP Interleaving setting, and then touch the button below “Insert Paper”. Select the paper drawer that contains the paper for the transparency interleaves, and then touch [Enter]. 4.3 “OHP Interleaving” Function Di2010/Di2510/Di3010/Di3510...
Page 44
4.3 “OHP Interleaving” Function Touch [Enter]. ❍ If [Cancel] is touched, the setting is cancelled. Press the [Start] key. The copies are printed. Di2010/Di2510/Di3010/Di3510...
To make settings for the “File Margin” function Load the document into the duplexing document feeder or position it on the original glass. Touch [Auxiliary], and then touch [File Margin]. 4-10 4.4 “File Margin” Function Original Document Copy Original Document Copy Di2010/Di2510/Di3010/Di3510...
Page 46
Touch to specify the width of the binding margin, and then touch [Enter]. ❍ If [Cancel] is touched, the setting is cancelled. Press the [Start] key. The copies are printed. Di2010/Di2510/Di3010/Di3510 Original Document Copy Original Document Copy 4-11...
When copying documents with punch holes, the pages can be printed with part of the document erased. Edge/Frame Erase settings The left side of the document is erased. The top edge of the document is erased. A frame around the document is erased. 4-12 4.5 “Edge/Frame Erase” Function Original Document Copy Di2010/Di2510/Di3010/Di3510...
[Edge/Frame Erase]. Select the desired Edge/Frame Erase setting. Touch to specify the width of the erased area, and then touch [Enter]. ❍ If [Cancel] is touched, the setting is cancelled. Press the [Start] key. The copies are printed. Di2010/Di2510/Di3010/Di3510 4-13...
Load the document into the duplexing document feeder or position it on the original glass. Touch [Auxiliary], and then touch [Image Repeat]. Touch [Size Input]. ❍ To automatically detect the document size, touch [Auto Detect]. 4-14 4.6 “Image Repeat” Function Di2010/Di2510/Di3010/Di3510...
Page 50
Y for the paper that is loaded. ❍ Touch until the cursor moves below the fraction that you wish to change. Touch [Enter]. ❍ If [Cancel] is touched, the setting is cancelled. Press the [Start] key. The copies are printed. Di2010/Di2510/Di3010/Di3510 4-15...
After “999” is printed, the number returns to “000”. To make settings for the “Distribution #” function Load the document into the duplexing document feeder or position it on the original glass. Touch [Auxiliary], and then touch [Image Settings]. Touch [Distribution #]. 4-16 4.7 “Distribution #” Function Di2010/Di2510/Di3010/Di3510...
Page 52
❍ Touch [Darker], [Normal] or [Lighter] to specify the print density for the distribution number. Touch [Enter]. ❍ If [Cancel] is touched, the setting is cancelled. Press the [Start] key. The copies are printed. Di2010/Di2510/Di3010/Di3510 4-17...
Copies can be printed with a watermark added to the background. To make settings for the “Watermark” function Load the document into the duplexing document feeder or position it on the original glass. Touch [Auxiliary], and then touch [Image Settings]. Touch [Watermark]. 4-18 4.8 “Watermark” Function Di2010/Di2510/Di3010/Di3510...
Page 54
❍ If [All Pages] is selected, the watermark is printed on all pages. Touch [Enter]. ❍ If [Cancel] is touched, the setting is cancelled. Press the [Start] key. The copies are printed. Di2010/Di2510/Di3010/Di3510 4-19...
The optional hard disk must be installed. To make copies using the “Image Stamping” function Load the document into the duplexing document feeder or position it on the glass. Touch [Auxiliary], and then touch [Image Settings]. Touch [Image Stamping]. 4-20 4.9 “Image Stamping” Function Di2010/Di2510/Di3010/Di3510...
Page 56
❍ If [All Pages] is selected, the image is printed on all pages. Touch [Enter]. ❍ If [Cancel] is touched, the setting is cancelled. Press the [Start] key. The copies are printed. Di2010/Di2510/Di3010/Di3510 4-21...
To set the “Black-White Reverse” function Load the document into the duplexing document feeder or position it on the original glass. Touch [Auxiliary], and then touch [Black-White Reverse]. Press the [Start] key. The copies are printed. 4-22 4.10 “Black-White Reverse” Function Di2010/Di2510/Di3010/Di3510...
After the first document batch is scanned, load the second document batch into the duplexing document feeder or position it on the original glass, and then press the [Start] key. After all document batches have been scanned, touch [Finish]. Press the [Start] key. The copies are printed. Di2010/Di2510/Di3010/Di3510 4-23...
Page 59
4.11 “Separate Scan” Function 4-24 Di2010/Di2510/Di3010/Di3510...
Utility mode. Utility screen This screen appears when the [Utility] key is pressed. The following screens appear when the corresponding button is touched. User’s Choice screen This screen provides functions for specifying various default settings for the copier. Di2010/Di2510/Di3010/Di3510...
This screen shows the total number of copies printed since the copier was installed. Copy Job Program Recall screen From this screen, a programmed copy job can be recalled. User Management screen This screen provides various functions for safely and correctly using the copier. Di2010/Di2510/Di3010/Di3510...
There are two screens: Administrator Management 1 and Administrator Manage- ment 2. The administrator access code must be entered before these screens can be displayed. For details on the functions available from the Administrator Management screens, refer to “6 Administrator Management Operations”. Di2010/Di2510/Di3010/Di3510...
Auto Panel Reset Plug-In Counter, ID key Reset 4in1 Copy Order Density Priority Default Copy Output Levels Printing Density Output Priority Di2010/Di2510/Di3010/Di3510 Settings ON, OFF ON, OFF Japanese, English, Spanish, French 1-Sided Ö 2-Sided, 2-Sided Ö 2-Sided, 1-Sided Ö 1-Sided...
Page 65
Density (ADF only) 5.2 User’s Choice Functions Settings ON, OFF Specify the bin of the finisher (option). ON, OFF Specify the time for dehumidifying the scanner. Crease (-10 to +10, 0) Center staple (-10 to +10, 0) Mode 1, Mode 2 Di2010/Di2510/Di3010/Di3510...
If [ON] is selected, the previously copied image data can be printed again, even after copying has finished or while the copier is in stand-by. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010/Di2510/Di3010/Di3510...
Touch [User’s Choice]. Touch [1/6], and then touch [Mixed Original Detection]. Touch [ON] or [OFF], and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5.3 Changing Default Settings Di2010/Di2510/Di3010/Di3510...
Press the [Utility] key. Touch [User’s Choice]. Touch [1/6], and then touch [Language Selected for LCD]. Select the desired language, and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010/Di2510/Di3010/Di3510...
Touch [2/6], and then touch [Original Ö Copy Default]. Select the desired setting, and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5-10 5.3 Changing Default Settings Di2010/Di2510/Di3010/Di3510...
Press the [Utility] key. Touch [User’s Choice]. Touch [2/6], and then touch [Auto Paper/Auto Size]. Select the desired setting, and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010/Di2510/Di3010/Di3510 5-11...
Touch [2/6], and then touch [Drawer Priority]. Select the desired paper drawer, and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5-12 5.3 Changing Default Settings Di2010/Di2510/Di3010/Di3510...
❍ : Not for 2 Sided paper Selecting this mode will mean that double sided copies on paper in that paper tray will not be possible. Di2010/Di2510/Di3010/Di3510 5-13...
❍ If [OFF] is selected, specify the Zoom settings for the 2in1 and 4in1 Copy settings. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5-14 5.3 Changing Default Settings Di2010/Di2510/Di3010/Di3510...
Use the 10-Key Pad to specify the desired length of time, and then touch [Enter]. (Specify a length of time between 1 and 240 minutes.) Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010/Di2510/Di3010/Di3510 5-15...
1 and 240 minutes.) ❍ Selecting the [No Reset] key means that sleep functions will no longer operate. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5-16 5.3 Changing Default Settings Di2010/Di2510/Di3010/Di3510...
LCD Back-light being set to off, then the Backlight will be turned off after the specified preheat or sleep time. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010/Di2510/Di3010/Di3510 5-17...
Basics screen is displayed can be set to 30 seconds, 1, 2, 3 or 5 minutes, or “No Reset”. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5-18 5.3 Changing Default Settings Di2010/Di2510/Di3010/Di3510...
Touch [User’s Choice]. Touch [3/6], and then touch [Plug- In Counter, ID key Reset]. Touch [ON] or [OFF], and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010/Di2510/Di3010/Di3510 5-19...
Touch [4/6], and then touch [4in1 Copy Order]. Select the page orientation for making 4in1 copies, and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5-20 5.3 Changing Default Settings Di2010/Di2510/Di3010/Di3510...
[Auto] or [Manual]. ❍ The default Original Image Type can be set to [Text], [Photo] or [Text/Photo]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010/Di2510/Di3010/Di3510 5-21...
[Normal] or [Darker]. ❍ The default Manual density level can be adjusted by one level at a time. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5-22 5.3 Changing Default Settings Di2010/Di2510/Di3010/Di3510...
Press the [Utility] key. Touch [User’s Choice]. Touch [4/6], and then touch [Printing Density]. Select the desired settings, and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010/Di2510/Di3010/Di3510 5-23...
Touch [User’s Choice]. Touch [4/6], and then touch [Output Priority]. Select the desired settings, and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5-24 5.3 Changing Default Settings Di2010/Di2510/Di3010/Di3510...
“Sort” setting is automatically selected when a document consisting of two or more pages is placed in the duplexing document feeder. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010/Di2510/Di3010/Di3510 5-25...
Touch [5/6], and then touch [Output Tray]. Select the appropriate output tray settings, and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5-26 5.3 Changing Default Settings Di2010/Di2510/Di3010/Di3510...
❍ If [OFF] is selected, a message appears, indicating that the paper should be selected. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010/Di2510/Di3010/Di3510 5-27...
Specify the time in the 24-hour format. ❍ To erase the value, press the [C] key. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5-28 5.3 Changing Default Settings Di2010/Di2510/Di3010/Di3510...
Press the [Utility] key. Touch [User’s Choice]. Touch [5/6], and then touch [Crease/Center Staple]. Touch to adjust the setting, and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010/Di2510/Di3010/Di3510 5-29...
2: The setting on the right is most appropriate for scanning faint document (such as those written with pencil). Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5-30 5.3 Changing Default Settings Di2010/Di2510/Di3010/Di3510...
A maximum of five images can be registered. For details on using the “Image Stamping” function, refer to ““Image Stamping” Function” on page 4-20. Note The optional hard disk must be installed. To register an image stamp Press the [Utility] key. Touch [User Set]. Touch [Image Mem. Input]. Di2010/Di2510/Di3010/Di3510 5-31...
Page 91
Then, touch select the length of side Y for the image document (between 1 inch and 11-11/16 inch). ❍ Touch until the cursor moves below the fraction that you wish to change. Touch [Enter]. 5-32 5.4 Registering an Image Stamp Di2010/Di2510/Di3010/Di3510...
Page 92
5.4 Registering an Image Stamp Position the document on the glass, and then select the orientation of the document. Press the [Start] key. The image is scanned. The image stamp is registered. Di2010/Di2510/Di3010/Di3510 5-33...
This counter shows the total number of double-sided computer printouts made. This counter shows the total number of pages that have been scanned. These counters show the total number of copies and printouts made for each account currently registered. (A counter for each registered account is listed.) Di2010/Di2510/Di3010/Di3510...
Touch [Check], and then touch a number button. Check the programmed settings. ❍ To display screen 2/2, touch [Next]. To return to screen 1/2, touch [Back]. Touch [Enter] to return to the Mode Check screen, and then touch [Exit] to return to the Basics screen. Di2010/Di2510/Di3010/Di3510 5-35...
Touch [Delete], and then touch number to delete. ❍ The copy program is deleted, appears on the button. Touch [Exit] to return to the Mode Check screen, and then touch [Exit] to return to the Basics screen. 5-36 5.6 Using Copy Programs Di2010/Di2510/Di3010/Di3510...
Touch the button assigned with the copy program that you wish to use. ❍ Only buttons that have been assigned a copy program are displayed. Check the settings, and then touch [Enter]. Set the document, and press the [Start] key. Di2010/Di2510/Di3010/Di3510 5-37...
(Default setting: 3) ✔ [Alarm Volume]: This function is used to adjust the volume of the alarm that is sounded when a paper misfeed occurs or an incorrect operation is specified. (Default setting: 3) 5-38 5.7 User Management Functions Di2010/Di2510/Di3010/Di3510...
To clean the touch panel (“Panel Cleaning” function) By setting panel cleaning, you can clean the panel without accidentally pressing panel buttons. Press the [Utility] key. Touch [User Management], and then touch [Panel Cleaning]. ❍ To cancel the function, press the [Panel Reset] key. Di2010/Di2510/Di3010/Di3510 5-39...
If this occurs, toner can be replenished. Press the [Utility] key. Touch [User Management], and then touch [Toner Replenisher]. The toner is replenished. 5-40 5.7 User Management Functions or the Di2010/Di2510/Di3010/Di3510...
To allow access to Administra- tor mode, turn the machine off, then on again. Keep the administrator code (Admin. Password) in a safe place hidden from the general user. 6.1 Administrator Management Screens Di2010/Di2510/Di3010/Di3510...
Page 102
When specifying [1000 Accounts] or [OFF] in the account management mode, neither the [Account Reg] nor the [Account Counter] keys will be dis- played. Refer to “To set the Account Management Mode” on page 6-12 for details. Di2010/Di2510/Di3010/Di3510 <Administrator Management 2>...
To set the date and time Follow the procedure described in “To display the Administrator Management screens” on page 6-2 to display the Administrator Management screen. Touch [Admin. 1], and then touch [Initial Settings]. Touch [Date/Time Set]. Touch [TimeDate]. 6.2 Initial Settings Di2010/Di2510/Di3010/Di3510...
To set the time zone Follow the procedure described in “To display the Administrator Management screens” on page 6-2 to display the Administrator Management screen. Touch [Admin. 1], and then touch [Initial Settings]. Touch [Date/Time Set]. Di2010/Di2510/Di3010/Di3510...
Page 105
[Enter]. ❍ The time difference can be adjusted in 30-minute intervals. Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 6.2 Initial Settings Di2010/Di2510/Di3010/Di3510...
Touch [Current Code], and then use the 10-Key Pad to type in the currently specified 8-digit administrator code (Admin. Password). ❍ Press the [C] key to erase all entered text. ❍ To return to the previous screen, touch [Cancel]. Di2010/Di2510/Di3010/Di3510...
Page 107
To return to the previous screen, touch [Cancel]. Note If the entered administrator code does not have 8 digits, the message “In- correct code and new administrator. Input administrator code.” appears. Type in an 8-digit administrator code. Touch [Enter]. 6.3 Administrator Settings Di2010/Di2510/Di3010/Di3510...
Use the 10-Key Pad to specify the maximum number of copies, and then touch [Enter]. ❍ Numbers between 1 and 99 can be specified. Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010/Di2510/Di3010/Di3510...
User’s Choice screen. On the User’s Choice [3/6] sleep mode setting screen, select [No]. Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 6-10 6.3 Administrator Settings Di2010/Di2510/Di3010/Di3510...
Total counter: displays the total counter value for each account. Additionally, clears the counter value [1000 Accounts] Enter the account number to make copies. Additionally, the following can be configured per account. ❍ Total counter: displays the total counter value for each account. Additionally, clears the counter value Di2010/Di2510/Di3010/Di3510 6-11...
Note When programming or chang- ing account information data, please set the default account information data. However, de- pending on the currently spec- ified account information method, the default screen may not be displayed. 6-12 6.4 Account Management Settings Di2010/Di2510/Di3010/Di3510...
Page 112
Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Note Only when setting [100 Accounts 1] or [100 Accounts 2], will the [Account Reg] or the [Account Counter] be displayed on the Admin.1 screen. Di2010/Di2510/Di3010/Di3510 6-13...
Set Letter paper in the 1st paper drawer, then press the [Start] key. Account management data is printed. Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 6-14 6.4 Account Management Settings Di2010/Di2510/Di3010/Di3510...
[Interrupt] key. If you wish to clear the total counter of other accounts, re- peat steps 4 and 5. Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010/Di2510/Di3010/Di3510 6-15...
[C] key. Use the 10-Key Pad to type in the value you wish to change. Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 6-16 6.4 Account Management Settings Di2010/Di2510/Di3010/Di3510...
Follow the procedure described in “To display the Administrator Management screens” on page 6-2 to display the Administrator Management screen. Touch [Admin. 1], and touch [Account Reg]. Select the account key to program or change. Touch [Account Name]. Di2010/Di2510/Di3010/Di3510 6-17...
Page 117
Touch [Enter]. Touch [Access Number], and enter the access code for the account. Touch [Enter]. Touch [Account Number], and enter the account number using the 10-Key Pad. Touch [Enter]. 6-18 6.5 Setting Account Registration Di2010/Di2510/Di3010/Di3510...
Page 118
Where you wish to change the programmed details, repeat from step 3, en- tering the correct details. To delete programmed details, at step 4, press the [Delete] key. Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2010/Di2510/Di3010/Di3510 6-19...
[Enter]. After checking the counter, then touch [Enter]. Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 6-20 6.5 Setting Account Registration Di2010/Di2510/Di3010/Di3510...
Follow the procedure described in “To display the Administrator Management screens” on page 6-2 to display the Administrator Management screen. Touch [Admin. 2], and then touch [Get Penalty]. To use the “Get Penalty” function, touch [ON]. To stop using the “Get Penalty” function, touch [OFF]. Di2010/Di2510/Di3010/Di3510 6-21...
Page 121
Touch [Enter]. ❍ To return to the previous screen, touch [Cancel]. Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 6-22 6.6 Setting Machine Access Di2010/Di2510/Di3010/Di3510...
4, 3, 2, 1, 0 6-24 6.7 Configuring Functions (Soft Switches) (HEX: 00) Setting Explanation * Do not change these bits. Do not clear Clear 00000 * Do not change these bits. Di2010/Di2510/Di3010/Di3510...
For more details, refer to the User Manual for the printer controller. In addition, to allow access after incorrect attempts to access Administrator mode, turn the machine off, then on again. Di2010/Di2510/Di3010/Di3510 6-25...
Specifications Copier Di2010/Di2510/Di3010/Di3510 Specification Type Platen Photo conductor Copying system Developing system Fusing system Resolution Document Paper types Paper sizes Paper capacity Warm-up time First copy Desktop Fixed platen (mirror scanning) Digital laser copying MTHG developing method Heat-roller-fixing system 600 dpi Types: Sheets, books Size: Maximum Ledger L (11 ×...
Page 128
Reduction ratios: × 0.785, × 0.733, × 0.647, × 0.500, minimal (× 0.930) Zoom ratios: × 0.250 to × 4.000 (in × 0.001 increments) 1 to 999 sheets (Di3510) 1 to 99 sheets (Di2010, Di2510, Di3010) Automatic, manual and photo manual Leading edge: 0.16 in.; Trailing edge: 0.16 in.;...
11 in. 8-1/2 in. Letter C Legal L Letter L — — — — — — — — Di2010/Di2510/Di3010/Di3510 7.1 Specifications 5-1/2 in. 8-1/2 × 5- 8-1/2 × 5- 1/2 C 1/2 L — — — — — — —...
Paper capacity Power requirements Power consumption Dimensions Weight Di2010/Di2510/Di3010/Di3510 Plain paper, recycle paper (15 to 24 lbs.) Ledger L (11 × 17 L), Legal L (8-1/2 × 14 L), Letter L/C, 5-1/2 × 8-1/2 L Supplied by main unit Less than 10 W 3-1/2 in.
Number of bins Paper type Paper size Paper capacity Dimensions Weight Power requirements Di2010/Di2510/Di3010/Di3510 1st drawer Plain paper (15 to 24 lbs.): (Letter L or smaller) Maximum 200 sheets Postcards, envelopes, overhead projector transparencies and label sheets: Maximum 20 sheets 2nd drawer Plain paper (15 to 24 lbs.): (Letter L or smaller) Maximum 1,000...
Clean the surface of the housing cover by wiping it with a soft cloth dampened with a mild household detergent. Original glass ➜ Clean the original glass by wiping it with a soft, dry cloth. 7-10 7.2 Care of the Copier Di2010/Di2510/Di3010/Di3510...
In addition, never use mild household detergent or glass cleaner to clean the operation panel or touch panel. Original glass ➜ Clean the original glass by wiping it with a soft, dry cloth. Di2010/Di2510/Di3010/Di3510 7-11...
7.3 Function Combination Table Function Combination Table 7-12 Di2010/Di2510/Di3010/Di3510...
Page 138
7.3 Function Combination Table Di2010/Di2510/Di3010/Di3510 7-13...
Page 139
7.3 Function Combination Table 7-14 Di2010/Di2510/Di3010/Di3510...
Page 140
7.3 Function Combination Table Di2010/Di2510/Di3010/Di3510 7-15...
Page 141
:The settings can be specified, but the function selected first is not performed. :The settings can be specified, but the function selected later is not performed. :This setting cannot be selected since the “Booklet Creation” setting is not selected. 7-16 7.3 Function Combination Table Di2010/Di2510/Di3010/Di3510...
Page 142
:This setting cannot be selected since the “Book” setting cannot be selected. I: A warning message should appear. I: The settings can be selected, but either the function will automatically be cancelled or the function is not performed. Di2010/Di2510/Di3010/Di3510 7-17...
8 in. × 10-1/2 in. 203 mm × 267 mm 8 in. × 10 in. 203 mm × 254 mm 5-1/2 in. × 8-1/2 in. 140 mm × 216 mm 4 in. × 6 in. 102 mm × 152 mm Di2010/Di2510/Di3010/Di3510...
105 mm × 148 mm 4-1/4 in. × 5-3/4 in. 257 mm × 364 mm 10 in. × 14-1/4 in. 182 mm × 257 mm 7-1/4 in. × 10 in. Di2010/Di2510/Di3010/Di3510 Desired Paper Size Zoom Ratio × 0.707 × 0.500 × 0.866 ×...
Page 145
× 1.214 × 0.846 Letter × 0.647 Invoice 11 in. × 17 in. × 1.294 11 in. × 14 in. × 1.076 × 0.647 Invoice 11 in. × 17 in. × 1.294 11 in. × 14 in. × 1.272 Di2010/Di2510/Di3010/Di3510...
Page 146
5-1/2 in. × 8-1/2 in. 139.7 mm × 215.9 mm Zoom ratio = Paper size/Document size 1 in. (inch) = 25.4 mm 1 mm = 0.0394 in. (inch) Di2010/Di2510/Di3010/Di3510 11 in. × 17 in. × 2.000 11 in. × 14 in. × 1.647 ×...
Note Only use toner that has been manufactured specifically for this copier. Do not throw away the used toner cartridges. Instead, keep them in their boxes to be collected by your service representative. 7-22 7.5 Consumables Di2010/Di2510/Di3010/Di3510...
7.5 Consumables Staple Cartridges MS-5D for the finisher Staples for staple binding 5,000 staples are provided in the staple cartridge. MS-2C for the saddle kit Staples for staple binding 2,000 staples are provided in the staple cartridge. Di2010/Di2510/Di3010/Di3510 7-23...
Page 151
Consumables ... 7-22 Copy program ... 5-35 Cover mode ...4-2 Crease/Center staple ... 5-29 Date and time ... 6-4 Density ...5-21 Distribution # ... 4-16 Drawer priority ... 5-12 Duplex unit ... 7-5 Duplexing document feeder ... 7-4 8.1 Index 5-23 Di2010/Di2510/Di3010/Di3510...
Page 152
Job separator ...7-8 Landscape ...1-5 Language selected ...5-9 Large capacity cabinet ...7-6 LCD back-light off ...5-17 Legal restrictions on copying ...3-7 Mail bin kit ...7-7 Memory recall ...5-7 Meter count ...5-34 Mixed original detection ...5-8 Mixed width document sizes ...7-4 Di2010/Di2510/Di3010/Di3510 4-13...
Page 153
Soft switches ... 6-23 Space requirements ... 3-3 Special paper ... 5-13 Specifications ... 7-2 Specify the date and time ... 6-4 Specify the time zone ... 6-5 Staple cartridges ... 7-23 Switchback unit ... 7-5 8.1 Index 5-20 Di2010/Di2510/Di3010/Di3510...
Page 154
8.1 Index Time zone ...6-5 Toner bottle ...7-22 Toner replenisher ...5-40 User management ...5-38 Utility mode ...5-2 Watermark ...4-18 Zoom ratios ...7-19 Di2010/Di2510/Di3010/Di3510...
Page 156
Copyright 2003 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. Printed in Japan The information contained in this manual is subject to change without notice to incorporate improvements made on the product or products the manual covers. KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. 2003. 11...