Table of Contents
Advertisement
Applications
AUTO Layout
Use this function to detect the image area of the original and center the whole image on
the copy paper.
❒ Copy mode is automatically set to 1-1; 1-2 mode is also available only when using Store mode.
❒ APS and AMS are automatically released. Changing Magnification is available.
❒ Non-image area erase is automatically selected. (Release it manually when using EDH to scan
originals.)
❒ Original/Copy size: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11", 5.5"x8.5"
❒ Incompatible Basic Copying Conditions: APS, AMS, Rotaion, 2-2, 2-1, Rotation Sort, Rotation
Group
❒ Incompatible Special Originals: Mixed Original, Z-folded Original
❒ Incompatible Applications: Sheet/Cover Insertion, Chapter*, Combination*, Booklet*, Image
Insert, Reverse Image*, Repeat, All-Image Area, Image Shift, Overlay, Storing image in Overlay
Memory
*
Available when Non-Image Area Erase is released.
NOTE: The AUTO layout function may not operate properly if the lighting in the work place is directly over the
platen glass. In this case, consult your service representative about an appropriate place for installation.
Application Selection Screen
Set original
AUTO layout copying
9-31
Advertisement
Chapters
Table of Contents
Troubleshooting
