Changing Paper Size Of Tray 3 And 4 - Konica Minolta Di5510 User Manual

Maintenance & Supplies
Loading Paper (continued)

Changing Paper Size of Tray 3 and 4

The main body trays 3 and 4 are user-adjustable. Change the paper size of the tray
according to the procedure below.
1 Withdraw the tray for which the paper size will be changed.
NOTE: Do not withdraw the tray forcibly; otherwise you may be injured.
2 Open the paper feed roller.
3 Remove the rear guide plate while pressing the knob, then insert it into the position
designated for your desired paper size.
NOTE: Be sure to insert the rear guide plate into the position of the paper size to be set; otherwise machine
trouble may occur.
4 Load paper on the tray, then align the side guide plates to the edge of the paper , while
pressing the release knob located at the rear side guide plate.
NOTE: Be sure that the side guide plates are securely aligned to the paper; otherwise the machine cannot detect
the correct paper size.
5 Close the paper feed roller, then push the tray back fully into the machine. The tray key
on the Basic Screen will indicate the paper size currently specified.
NOTE: Do not bump the tray into the main body; otherwise machine trouble may be caused.
14-8
2
1